Owner's Manual

12
English
System Setup
Auto Answer
This is a setting to determine whether
any incoming call will be automatically or
manually answered.
∗
The factory default setting is “OFF”.
1. Select “A-ANSWER” in system setup
items.
2. Turn [ROTARY] knob to select “ON” or
“OFF”.
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer
the call.
Auto Connect
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗
The factory default setting is “ON”.
1. Select “A-CONNECT” in system setup
items.
2. Turn [ROTARY] knob to select “ON” or
“OFF”.
Priority for Phonebook
Download
Setting the priority for the phonebook
download automatically while pairing.
∗
The factory default setting is “DEVICE”.
1. Select “TEL MEMORY” in system setup
items.
2. Turn [ROTARY] knob to select the
setting: DEVICE/SIM.
DEVICE: Phonebook download from
device firstly.
SIM: Phonebook download from SIM
card firstly.
Pin Code Setting
This pin code is used during pairing. A
maximum of 10 digits can be changed
through this unit.
∗
The factory default pass key is “1234”.
1. Select “PIN CODE” in system setup
items.
2. Press [ROTARY] knob.
3. Press [
x
] or [
v
] button to move the
cursor.
4. Turn [ROTARY] knob to select the
desired digits.
5. Long press [ROTARY] knob to store in
memory.
Performing Memory Reset
Reset various settings in the memory.
Note:
• Thesettingswillremaininthememory
evenifyouturnthepoweroff.
1. Select “RESET” in system setup items,
and press [ROTARY ] knob.
2. Turn [ROTARY] knob to select
“CANCLE” or “ARE U SURE”, and
press [ROTARY ] knob.
CANCEL: cancel resetting
ARE U SURE: “CLEARED” appears
in the display, and the memory will be
cleared.