QY8000/QY8001/QY8002/QY8003 QY8050/QY8051/QY8052/QY8053 SERIES MODEL Navigation system manual
Table of contents 1 English Safety Precautions ������������������������������������������������������ 2 Features ������������������������������������������������������������ 5 Names of Various Parts ���������������������������������������������������� 5 Basic method of use ����������������������������������������������������� 6 Basic Operations ������������������������������������������������������� 8 Basic Settings ��������������������������������������������������������� 8 Source Media Mode ����
Safety Precautions Warning English ●●When driving, the driver shall not operate…. The driver must park the vehicle in a safe place before operating the system. ●●When driving, the driver must not read the navigation map… Please refer to the voice prompts and follow the actual traffic laws in driving. ●●When driving, the driver must not watch the display of this unit…. Or the conditions at front of the vehicle may be neglected that may result in traffic accidents.
About FCC Warning NOTE: GG This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English une communication satisfaisante. ●●Le présent appareil est conforme aux CNR d’ Industrie Canada applicables aux appareils radio exempts de licence. L’ exploitation est autoris é e aux deux conditions suivantes: (1) l’ appareil ne doit pas produire de brouillage, et (2) l’ utilisateur de l’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’ en compromettre le fonctionnement.
■Use of New Disc ●●When a new disc is used, there might be some burrs at the inner edge and outer of the disc that shall be removed with a ball pen or other means.Or the bur will adhere to the playing side of the disc that may cause skipping. ■Special- Shaped Disc ●●Do not use any leased disc with glass film, lease label or other adhesive. If such disc is played in the player, it will be hard to get it out and may result in failure.
English ●●With standard USB port to support USB audio playing and iPod playing functions. ●●Support Bluetooth mobile and Bluetooth audio playing functions. ●●Support AUX input functions. Names of Various Parts Panel Buttons 1 [Q]Eject button: Short press it to eject the disc inside the unit. 2 Disc slot: CD disc can be inserted for playing. 3 LCD(touch screen): To display the working statuses of various modes. 4 SD card slot: Map SD card. 5 [CAMERA] button: To enter camera mode.
Basic method of use Turning the power on Setting the time 1 Press [MENU]/[MAP]/[AUDIO] button on the panel. 2 Touch English Turn the opening screen is displayed, the current position map screen or audio screen is displayed. When the engine key is turned to the "OFF" position, the unit is turn off. screen. use. to enter Settings Screen. Switching the language When the unit turns on, the default language and unit is set to English and US. Switch to your language and unit to use the unit.
zz Map navigation: Adjust Voice Guidance volume when voice guidance interrupt. zz Parking guidance: Adjust parking guidance volume in parking guidance. English For example, turn the volume knob in Source USB mode to adjust the volume as shown below. ■Switch to Bluetooth mobile phone mode Touch Press [AUDIO] button in Source mode to switch to source selection screen. switch to Bluetooth mobile phone mode. zz Turn the knob clockwise: volume up. zz Turn the knob counterclockwise: volume down.
Day/Night Display Mode Switch Basic Settings 1 Press [MENU]/[MAP]/[AUDIO] button on the panel to display the function bar. Pair Bluetooth Mobile Phone or Bluetooth Audio Device / check the list of paired equipment/Set Bluetooth system of this unit. information prompted. to view Handsfree Phone and Audio player list. 5 Touch to edit Bluetooth information.
Phonebook. 5 Touch English to set Volume and Ringtone. 6 Touch to turn the automatic hold on or off. Audio Settings To set various sound effects. 1 Touch 2 Touch to enter Audio setting screen. , the screen display can be switched off to enter power save mode. z After the screen display is OFF, the buttons on the panel are still operational. Press [ ] button on the panel will resume the previous source play screen or map navigation screen. Or you can press any button for the corresponding operation.
guidance voice. 1 Touch to enter Volume & Beeps screen. Edit menu 1 Touch (Only for QY8002/8052/8254) to enter Edit menu screen. English FM/AM mode Next page 2 Touch to delete the quick menu. 3 Touch to add the quick menu. 4 Touch the quick menu to rearrange it. 1 Touch / to enter FM/AM screen. 1 2 Source Media Mode 1 Press 2 Touch or to adjust the volume. 3 Touch to turn on or off beeps. 4 Touch to turn on or off guidance voice . [AUDIO] button on the panel to enter source screen.
SXM mode English (Only for QY8000/8001/8050/8051) Before to enter this mode you need to check the antenna. 1 Touch to enter SiriusXM screen. 12345 categories etc. 0Back to source screen. 1 2 DAB mode (Only for QY8002/8052) 1 Touch to enter DAB screen. 12 3 3 0 6 9 8 7 5 6 4 1 Channel category. 2 Channel name. 3 Artist name. 4 Song title. 5 Save the favourite channel by artist or song alert. 6 Preset channel list(Station list). Up to 18 channels can be saved.
1 1 1 2 2 2 English 3 4 5 6 7 1Back to source screen. 2Scanning the Tracks, select the folder and track, turn on or off the display of album artwork. 3Turn on or off repeat play. 4Short touch: switch to Previous Track; Long touch: Fast Backward. 5Touch to Play/Pause 6Short touch: switch to next Track; Long touch: Fast Forward. 7Turn on or off shuffle play. iPod mode 1 Touch to enter USB audio screen when you connect a iPod. 3 4 5 6 3 7 1Back to source screen.
2 Choose “Low”, “Middle”or “High” input sense of auxiliary device. you have to edit the PIN (minimum 4 digits and maximum 16 digits) to pair the audio device. English Bluetooth Operation 5 After successful pairing, it will automatically return to Bluetooth Setting screen. Bluetooth Telephone Pair Bluetooth Device 1 Touch 1 Touch to select the mobile phone or audio device to pair. to enter Phone screen. 4 After entering the PIN, touch and operate as per the information prompted.
8 Touch to view paired phones. 9 Touch to view text Navigation Menu Types and Operation ■Map menu (Menu on current location map) Touch on the map screen to display the Map menu at the left side of the screen. You can store the current location to the Address Book or change the map appearance. 1 2 3 4 5 1 [BACK] key: Return to the map screen.
deletes the currently set destination or waypoints when the cursor points at them. 1 2 3 English 3 Map Screen Features ■Types of the map There are two types of map: the 2D map and the 3D map. Such as the method of scrolling the map, some operations are different depending on the map types. ● 2D Map The 2D map is a map screen represented to the plane just like the map of atlases. It is suitable for searching a destination and confirming the road or route.
displayed on the map. 1 1 2 3 1 [ ] (Slow Scroll)key: Displayed only on the 2D map. Turn on the Slow scroll mode. Scroll cursor: Displayed when scrolling the map. 2 Displays the name of the street under the cursor. Indicators displayed during the route guidance mode After a destination is set and travelling is started, the guidance route and various guidance information are displayed on the map. 1 Small Turn Arrow display:Displays the turning direction and distance to the next guidance point.
3 Touch to display the View Settings screen. GG 3D Map English 2 Touch or map scale. to change the ■Changing the map appearance The Map screen can be adjusted regarding orientation or appearance of the map. 1 Touch on the Map screen of the current vehicle location. 2 Touch to enter Map View screen. GG 2D/2D Map zz [Intersection]:During the route guidance mode, displays the Intersection Close-up display which displays the turning direction of the next guidance junction at the left of the screen.
tion is set to Heading-Up. raise the angle, and the angle. to lower freeway. Navigation System Settings English ●●[Map Colour] key:Selects the colours(Map Colour 1/2/3/4) of the map. ●●[Map Text Size] key: Change the map text size(Large, Medium,Small). ●●[Birdview Angle] key: Changes the angle of the 3D map. Touch to 1 Press [MENU]/[MAP]/[AUDIO] button on the panel to display the function bar. 2 Touch , to enter Navigation Settings Screen. zz This control is available when [3D] is selected.
English From the Address Book, you can register the home address, addresses of facilities and places, routes, and Avoid Areas. You can also edit the data registered. The registered places or routes can be set as the destination or as the current route. 1 Touch to enter Address Book screen. your home by a similar way as for entering destinations. 3 Touch to register it. To edit the Home Location 1 Touch ■Home Location Register your home address. You can edit the registered home address.
To edit the Stored Route 1 Touch 2 Touch ■Avoid Area You can register areas you do not want to pass or areas that often get congested as an Avoid Area. When you register the Avoid Areas, you can set the system to calculate routes avoiding the registered areas. Up to 10 Avoid Areas can be registered. You can edit the registered Avoid Areas. To register an Avoid Area 1 Touch 2 Touch . . 3 Search the area to avoid by a simi- lar way as for entering a destination. 4 Touch to register it.
English ■Transfer Address Book You can Transfer Address Book from SD card. 1 Touch . ●●[Export Data] key: Export data to SD card. ●●[Import Data] key: Import data from SD card. Navigation Settings ■Map View Please refer to “Changing the map appearance” on Page 第18页 . ■Map Icons Switch ON or OFF Landmark icon display for each type. 1 Touch . 2 Touch the desired item key you wish to change the setting. 3 The types of icons that can be set are the following 6 types.
■Others 1 Touch to enter the Other settings screen. ●●[Map Scrolling Information] key: When you scroll the Map screen and move the cursor on an icon, the information on the location can be displayed. You can set this function whether to activate or not. displayed confirmation screen. zz [TMC Traffic Icons] key zz [Destination/Waypoint Icons] key zz [Latitude/Longitude Info.] key ●●[Customize nearby POIs] key: You can customise the five categories of the Customize nearby POI feature.
Setting destination by entering the address English This section explains the basic operation procedure to set the destination in detail, using the example to specify the destination by entering the address from the Destination menu. Read this explanation thoroughly because this procedure is similar to other destination entering methods. For other destination entering methods, please refer to “Entering the Destination” on page 第25页.
displayed on one page. 6 Touch Note: GG You can omit the house number entry. Proceed to step 9. 8 Confirm the entries, then touch . ●●[Route Details] key: The Calculate Route menu is displayed. You can change the route search conditions or check the route information. ●●[Move Location] key: Display Map screen is displayed. You can adjust the location of the destination. ●●[Add to Route] key: When the destination is already set, the specified location is set as the waypoint.
English ■By Address Book Specifies a place registered in the navigation system as the destination. Note: • To use this function, register places beforehand. 1 Touch . 2 Touch the stored location you wish to go from the displayed Address Book list. 3 Confirm the location of the destina. tion, then touch ■By Street Address For the operation procedure, refer to “Setting destination by entering the address” on page 第23页.
6 Confirm the location of the destina. tion, then touch 4 Touch the place you wish to go from the displayed place list. 5 Confirm the location of the destination, then touch . ■Going Home When your home address is registered, you can start route guidance to your home by a simple operation. Note: GG When your home address is not 1 Touch . 2 Touch . The route to your home is automatically calculated and the route guidance is started.
■By City Center The center of a city can be set as the destination. English 1 Touch to enter the character input screen. the name of the city, then touch . The city center list displayed. 3 Touch the place you wish to go from the displayed place list. 4 Touch . 2 Enter ■Searching Your Destination from the Map Screen You can search for a place by scrolling the map, and set it as the destination. 1 Scroll the map by touching the Map screen, and move the cursor to the place you wish to go to. Touch .
Note: GG Before the Junction Map is displayed, a voice guidance will be heard at approx. 600 m or 0.4 miles (2 km or 1.3 miles for a motorway) from the next guidance point. You can change this setting by setting the Junction Guidance Settings. 1 3 Guidance point: Indicates the next guidance point. ■Turn list on Route The screen is always divided into two displays and the Turn List on Route is displayed on the left display if Turn List is activated.
function bar. 2 Touch to enter Route menu screen when a route had exist. can recalculate the route if you want. 1 Touch , the route English is automatically recalculated, and the Calculate Route screen is displayed. 2 Touch , the route guidance will be restarted. ■Delete/restarting the route guidance Delete the route guidance/Terminates the route guidance during the route guidance mode. 1 Touch 1 Touch to enter Route Info. screen. . A confir- mation message is displayed.
You can change the conditions of route calculation. restarted. ■ Editing the route You can edit the current route. to enter the Edit Route screen. 2 [Add Destination] key: Touch this key when you want to set a new destination. The original destination will be set as a waypoint in the route. ●●[Add Waypoint] key: Up to 5 waypoints can be set. The specified waypoints are displayed by marks with the ordinal number for visiting.
