QY-8200/QY-8250 SERIES MODEL Navigation system manual
Table of contents 1 English Names of Various Parts ���������������������������������������������������� 5 Basic method of use ����������������������������������������������������� 6 Basic Operations ������������������������������������������������������� 7 Basic Settings ��������������������������������������������������������� 8 Source Media Mode ����������������������������������������������������� 11 Bluetooth Operation ����������������������������������������������������� 13 Navigation �������
Safety Precautions Warning English ●●When driving, the driver shall not operate…. The driver must park the vehicle in a safe place before operating the system. ●●When driving, the driver must not read the navigation map… Please refer to the voice prompts and follow the actual traffic laws in driving. ●●When driving, the driver must not watch the display of this unit…. Or the conditions at front of the vehicle may be neglected that may result in traffic accidents.
Warning NOTE: GG This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English when something abnormal occurs during the playing. If the machine can’t operate normally even if you operate as per the displayed instructions, the machine may have malfunctions and you should contact NISSAN dealers. ●●Distortion may occur if the vehicle is driven on the road of harsh conditions or is vibrated violently. ●●MP3/WMA music files stored in CD-ROW/CD-R/CDRW may be played.
LCD ●●There will be brightened or darkened visual phenomenon if you watch the LCD from the sides. ●●The screen will become illegible under direct sunlight or external light on the display. ●●If the machine is turned on when the temperature is below zero, LCD will appear to be darker than usual until the temperature inside the machine rises.
5 [z] button: Decrease the volume. button/Volume Knob: short press to turn off/on audio device. 7 [MAP] button: Press to enter the map screen. 8 [MENU] button:Press to enter Menu Screen to select audio function or navigation function. 9 [STATUS] button: View current status. 0[D]Next Track button: In CD/USB/iPod/Bluetooth Audio Device mode, short press it to select the next track to play, and long press it to Fast Forward; in AM/FM mode, short press to search radio station frequency up manually.
mobile phone mode. English 3 Touch 4 Set . the clock you need. Mode Switch ■Switch to navigation mode Press [MAP] button on the panel to switch to navigation mode for map display. ■Switch to source mode Press [AUDIO] button on the panel or touch to switch to source mode such as Radio mode. Basic Operations Main menu operations On main menu screen you can enter corresponding work mode by touch the icons on the screen. 1 Press [MENU] on the panel or touch to enter main menu screen.
zz Change page by dragging left or right or touch and . English Adjust Volume 1 Press the [w] or [z] button on the panel to adjust the volume. zz Source mode: Adjust the volume of source. zz Bluetooth Mobile Phone mode: Adjust the incoming call ringtone volume when receiving a call, adjust the outgoing call ringtone volume when making a call, or adjust the call volume when speaking on the phone. zz Map navigation: Adjust Voice Guidance volume when voice guidance interrupt.
zz When there is no Bluetooth pairing equipment record, the items “Connect with Bluetooth” and “Select Device” will be invalid. 2 Touch Phone settings You can confirm and view various information concerning about the Bluetooth phone. Note: Before setting phone you need to pair the mobile phone with this unit. 1 Touch Phone setting screen. to enter English to turn Bluetooth On or Off. 3 Touch to Select the mobile phone or audio device to connect. You can operate as per the information prompted.
[ ] button on the panel will resume the previous source play screen or map navigation screen. Or you can press any button for the corresponding operation. ground color adjustment screen. Next page English 3 Touch to enter brightness adjustment screen. or to change zz Touch the background color. Volume and Beeps or to adjust the zz Touch brightness of display. 4 Touch to enter contrast adjustment screen. or to adjust zz Touch the contrast of display.
3 Touch Source Media Mode 1 Press [AUDIO] button on the panel or touch to enter source screen. 1 2 3 1 Back to source screen. 2 View station list, RDS Info and turn on or off HD radio mode. 3Preset channel list(Station list). Up to 12 channels can be saved. SXM mode Before to enter this mode you need to check the antenna. 1 Touch to enter SiriusXM screen. 12345 FM/AM mode 1 Touch screen. / to enter FM/AM 2 Channel name. 3 Artist name. 4 Song title.
English 2View track list and select to play it. 3Turn on or off repeat play. 4Short touch: switch to Previous Track; Long touch: Fast Backward. 5Touch to Play/Pause 6Short touch: switch to next Track; Long touch: Fast Forward. 7Turn on or off shuffle play. 6Short touch: switch to next Track; Long touch: Fast Forward. 7Turn on or off shuffle play. iPod mode 1 Touch to enter iPod audio screen when you connect an iPod. 7Turn on or off shuffle play.
AUX mode you want to select the mobile phone 秋to pair, touch . English Insert the external sound device into AUX slot via the audio cable. 1 Touch to enter AUX mode. 2 If 3 If 2 Choose “Low”, “Middle”or “High” input sense of auxiliary device. you want to select the audio device秋to pair, touch , and you have to edit the PIN (minimum 4 digits and maximum 16 digits) to pair the audio device. Bluetooth Operation 5 After successful pairing, it will automatically return to Bluetooth Setting screen.
Touch on the map screen to English display the Map menu at the left side of the screen. You can store the current location to the Address Book or change the map appearance. 1 2 Touch to edit and delete Quick Dial number. 3 Touch to view Phonebook. 4 Touch to view Call History records. 5 Touch to dial phone number by keypad. 6 Touch to pair a phone with this unit. 7 Touch to select paired phone. 8 Touch to set Volume.
The 2D map is a map screen represented to the plane just like the map of atlases. It is suitable for searching a destination and confirming the road or route. ●●3D Map Map Screen Features ■Types of the map There are two types of map: the 2D map and the 3D map. Such as the method of scrolling the map, some operation are different depending on the map types. ●●2D Map The 3D map is a map screen using a viewing position above the vehicle while looking in the direction of the car heading.
the scroll cursor is displayed on the map. 1 the touched direction, and touch the left or right part to rotate the map while touching. 2 English 1 2 3 only on the 2D map. Turn on the Slow scroll mode. Scroll cursor: Displayed when scrolling the map. 2 Displays the name of the street under the cursor. 1 Small Turn Arrow display:Displays the turning direction and distance to the next guidance point.
zz Touch the corresponding key to change the map view. 3 Touch to display the View Settings screen. English 2 Touch or map scale. • 3D Map to change the ■Changing the map appearance The Map screen can be adjusted regarding orientation or appearance of the map. 1 Touch on the Map screen of the current vehicle location. 2 Touch to enter Map View screen.
when [2D] is selected. English 4 Touch to enter Map Settings screen. ●●[Long Range] key: Changes the map view to view a wider area in the direction that the vehicle is travelling. When this feature is activated, the vehicle mark is located slightly lower than the centre of the screen. zz This control is available when [2D] is selected and the Map Orientation is set to Heading-Up. ●●[Map Colour] key:Selects the colours(Map Colour 1/2/3/4) of the map.
■Home Location Register your home address. You can edit the registered home address. Registering/Editing the Address Book From the Address Book, you can register the home address, addresses of facilities and places, routes, and Avoid Areas. You can also edit the data registered. The Home Location can be registered when the key is displayed. 1 Touch . 2 Search for the location of your home by a similar way as for entering destinations. To register Location 1 Touch . .
■Stored Routes Registers the current route. You can register up to 5 routes, and can also edit the registered routes. English set the system to calculate routes avoiding the registered areas. Up to 10 Avoid Areas can be registered. You can edit the registered Avoid Areas. To register the current route 1 Touch 2 Touch . . 3 Then touch from the displayed confirmation screen. To edit the Stored Route 1 Touch 2 Touch . the name of the Stored Route you wish to edit. 3 Touch the desired item, then edit it.
screen, touch . ■Tansfer Address Book You can Tansfer Address Book from SD card. 1 Touch . ●●[Export Data] key:Export data to SD card. ●●[Import Data] key:Import data from SD card. Navigation Settings ■Map View Please refer to “Changing the map appearance” on Page 第17页 . ■Map Icons Switches ON or OFF Landmark icon display for each type. 1 Touch . 2 Touch the desired item key you wish to change the setting. types of icons that can be set are the following 6 types.
methods. English zz [Minimise Toll Roads]: Minimises the use of toll roads. zz [Use Time Restricted Roads]:Uses roads with restricted usage time. zz [Use Real Time Traffic Information] :Considers the traffic information for routing. zz [Use Avoid Area Settings]:Takes a detour to avoid the registered Avoid Area. zz [Use Ferries]:Uses car ferries for routing. zz [Use Learned Routes]:Considers the Learned Routes for routing. zz [Use HOV Lanes]:Uses HOV lanes for routing.
English ●●Confirm the position of the place found with the Set Location menu screen, then start the route guidance. You can store the place found to the Address Book, or can confirm the information according to the place, as well as set it as destination. You can also display other suggested routes, or confirm information of the route. button on the panel to display the fuction bar. 2 Touch to enter Destination screen when no route exist.
English ●●[List] key:Displays the city name list corresponding to the entered character(s). ●●[ABC] key:Displays the alphabetic input keyboard. ●●[ÀÈß] key:Displays the accent characters input keyboard. ●●[12#] key:Displays the number input keyboard. Note: GG During the character entry, the system shows the city name list automatically when all the matching cities can be displayed on one page. 5 Touch to enter the city name you wish to go to by touching characters on the screen.
example For the operation procedure hereafter, see the explanation of each section. . When a additional category list is displayed, touch a category again to select one. 3 Set the narrow down conditions for the places. ■By Street Address For the operation procedure, refer to “Setting destination by entering the address” on page 第21页. ■By charging spot 1 Touch . 2 Touch your desired category. 3 Confirm the location of the destination, then touch .
English • To use this function, register places beforehand. 1 Touch . 2 Touch the stored location you wish to go from the displayed Address Book list. 3 Confirm the location of the destination, then touch . ■By Intersection An intersection of any two streets can be set as the destination. 1 Touch . 2 Enter the 1st street and the 2nd street, then touch 3 Touch . ■By Nearby Points of Interest 1 Touch . 2 Touch your desired category. An example of specifying RESTAURANT is explained below.
then set it as the new route. Note: • To use this function, one or more registered routes are required. 1 Touch 2 Touch . Enter the phone number including the area code, and then touch . 2 Touch the place you wish to go from the displayed place list. 3 Touch . ■By City Center The center of a city can be set as the destination. 1 Touch to enter the character input screen. the name of the city, then touch . The city center list displayed. 3 Touch the place you wish to go from the displayed place list.
Route Guidance English After you have entered the destination and started the route guidance, you will be guided along the route by screen display and by voice. Route Guidance Screen Features As well as the Map screen, various guidance screens are displayed during the route guidance mode according to the situation. Pressing the [MAP] button to switch the screen between the following guidance screens and the full map screen. ■Junction Map When you get near to approx.
on Route screen. About the Voice Guidance Changing/Editing the Route Settings From the Route menu, editing the current route, confirming the route information, setting the conditions of the route calculation, etc. can be performed. 1 Press [MENU] button on the panel. 2 Touch to enter Route menu screen when a route had exist.
1 Touch to enter the Edit Route screen. English 2 [Add Destination] key: Touch this key when you want to set a new destination. The original destination will be set as a waypoint in the route. ●●[Add Waypoint] key: Up to 5 waypoints can be set. The specified waypoints are displayed by marks with the ordinal number for visiting. ●●[(Current destination/waypoint name)] key: You can touch the name of the current destination or waypoints you wish to edit.
About Information ●●[NissanConnect Apps] key: You can browse the NissanConnect Apps. ●●[SXM Weather] key: You can browse the weather information. ●●[SXM Traffic] key: You can browse the traffic information. ●●[SXM Sports] key: You can browse English You can view kinds of information. 1 Press [MENU] button on the panel. 2 Touch to enter Info screen. the sports information. ●●[SXM Stocks] key: You can add or delete the stocks.
