the scroll cursor is di the map. . (Slow Scroll: Displayed only on the 2D map. Turn on the Slow scroll mode. Scroll cursor: Displayed when scrolling the map. © Displays the name of the street under the cursor. Indicators displayed during the route guidance mode After a destination is set and traveling is started, the guidance route and various guidance information are displayed on the map. € Small Turn Arrow display: Displays the turning direction and distance to the next guidance point.
or 7 to change the map scale. # Changing the map appearance The Map screen can be adjusted regarding orientation or appearance of the map. @ Touch [J on the Map screen of the current vehicle location. @ Touch Eli to enter Map View screen. Le 1 a Basie ® Touch the corresponding key to change the map view. @ Touch BERLE] to display the View Settings screen.
® [Map Orientation] key: Changes the orientation of the map between Heading Up and North Up. ® This control is available when [2D] is selected. @ [Long Range] key: Changes the map view to view a wider area in the direction that the vehicles is traveling. When this feature is activated, the vehicle mark is located slightly lower than the center of the screen. @ This control is available when [2D] is selected and the Map Orientation is set to Heading-Up.
fe Reglistering/Editing the Address Book From the Address Book, you can register the home address, addresses of facilities and places, routes, and Avoid Areas. You can also edit the data registered. The registered places or routs can be set as the destination or as the current route. BE Home Location Register your home address. You can edit the registered home address. To register the Home Location The Horne Location can be registered when the Bartlett tad key is displayed.
BE Stored Routes Registers the current route. You can register up to 5 routes, and can also audit the registered routes. To register the current route © Touch IRENE EAE @Touch oe 000i ® Then touch from the displayed confirmation screen. To edit the Stored Route ® Touch BAIRNS. @ Touch the name of the Stored Route you wish to edit. @ Touch the desired item, then edit it. ® [Rename] key: Changes the name of the Stored Route. @ [Replace] key: Replaces the Stored Route with the current route.
8 [Delete All Previous Destinations]: Distastes all the registered previous destinations. ® [Delete Previous only the previous destination that you specify on the Delete Previous Destination screen. @ [Delete Previous Starting Point]: Elates the starting point. ® From the displayed confirmation screen, touch 0 0 Transfer Address Book You can Transfer Address Book from SD card. ® Touch IRE. @ [Export Data] key:Export data fo 8D card. ® [Import Data] key: Import data from SD card.
methods. # [Minimize Toll Roads]: Minimizes the use of toll roads. ® [Use Time Restricted roads with restricted usage time. @® [Use Real Time Traffic information] :Considers the traffic information for routing. @ [Use Avoid Area Settings] Takes a detour to avoid the registered Avoid Area. ® [Use car ferries for routing. @ [Use Learned the Learned Routes for routing. ® [Use HOV HOV lanes for routing.
' ® Confirm the position of the place found with the Set Location menu screen, then start the route guidance. You can store the place found fo the Address Book, or can confirm the information according fo the place, as well as set it as destination. You can also display other suggested routes, or confirm information of the route.
® [List] key:Displays the city name list corresponding to the entered character(s). ® [ABC] key:Displays the alphabetic input keyboard. ® [AEB] key:Displays the accent characters input keyboard. ® [124] key:Displays the number input keyboard. Note: ¢ During the character entry, the system shows the city name list automatically when all the marching cities can be displayed on one page. ® Touch to enter the city name you wish touching characters on the screen.
For the operation procedure hereafter, see the explanation of each section. IE By Street Address For the operation procedure, refer fo “Setting destination by entering the address” on page 21.
» To use this function, register places beforehand. @ Touch 2 ® Touch the stored location you wish to go from the displayed Address Book list. ® Confirm the location of the destination, then touch a BE By Intersection An intersection of any two streets can be set as the destination. ® Touch ® Enter the 1st street and the 2nd street, then touch ® Touch soon a HBy ee Points of Interest @® Touch your desired category. An example of specifying RESTAURANT is explained below.
for the location. ® Only the locations included in the database in the map data can be searched by the phone number. + Residential phone numbers cannot be used to search for a location. | Enter the phone number including the area code, and then touch | . ® Touch the place you wish to go from the displayed place list. @ Touch EIA Bi By Clay Center The center of a city can be set as the destination. to enter the character input screen. ® Enter the name of the city, then touch . The city center list displayed.
Route Guidance After you have entered the destination and started the route guidance, you will be guided along the routs by screen display and by voice. Route Guidance Screen Features As well as the Map screen, various guidance screens are displayed during the route guidance mode according to the situation. Pressing the [MAP] button fo switch the screen between the following guidance screens and the full map screen. Junction Map When you get near to approx.
on Route screen. About the Voice Guidance After starting the route guidance, not only guidance by screen but also guidance by voice, such as the turning direction or the distance fo the guidance point, will be given when you get near to the guidance point. You can set whether to use the voice guidance or not, and set the volume to be changed according to the vehicle spread.
fo enter @ [Add Destination] key: Touch this key when you want to set a new destination. The original destination will be set as a way point in the route. ® [Add Way point] key: Up to 5 way points can be set. The specified way points are displayed by marks with the ordinal number for visiting. @ [Current interdenominational name)] key: You can touch the name of the current destination or way points you wish fo edit. ® [(Route calculation criteria)] key: You can change the conditions of route calculation.
About Information You can view kinds of information. ® Press [MENU] button on the panel. @ Touch Be to enter Info screen. ® [Nissan Connect Apps] key: You can browse the Nissan Connect Apps. @ [SKM Weather] key: You can browse the weather information. ® [SXM Traffic] key: You can browse the traffic information. ® [SXM Sports] key: You can browse the sports information. @® [SXM Stocks] key: You can add or delete the stocks. @® [SXM Movie Listings] key: You can browse the nearby theaters and current movies.
