Car Navigation MODEL QY-8650 Navigation system manual
Table of contents 1 English Features ������������������������������������������������������������ 5 Names of Various Parts ���������������������������������������������������� 5 Basic method of use ����������������������������������������������������� 6 Basic Operations ������������������������������������������������������� 7 Basic Settings ��������������������������������������������������������� 8 Source Media Mode ����������������������������������������������������� 12 Bluetooth Operation ���
Safety Precautions Warning English ●●When driving, the driver shall not operate…. The driver must park the vehicle in a safe place before operating the system. ●●When driving, the driver must not read the navigation map… Please refer to the voice prompts and follow the actual traffic laws in driving. ●●When driving, the driver must not watch the display of this unit…. Or the conditions at front of the vehicle may be neglected that may result in traffic accidents.
Warning ● Changes or modifications to this unit not expressly ap●proved by the party responsible for compliance could void the user’s authority to operate the equipment. However, there is no guarantee that interference will not occur in a particular installation.
English ●●In order to protect the internal structure of the player, the player will stop playing automatically for protection when something abnormal occurs during the playing. If the machine can’t operate normally even if you operate as per the displayed instructions, the machine may have malfunctions and you should contact NISSAN dealers. ●●Distortion may occur if the vehicle is driven on the road of harsh conditions or is vibrated violently.
or the machine will be damaged. Do not use such kind of discs. LCD ●●There will be brightened or darkened visual phenomenon if you watch the LCD from the sides. ●●The screen will become illegible under direct sunlight or external light on the display. ●●If the machine is turned on when the temperature is below zero, LCD will appear to be darker than usual until the temperature inside the machine rises.
English to jump to previous or next touch key in the general mode; press and rotate the knob to adjust the sound effect or tone quality. Rotate to zoom in or out the map in the map mode. button/[VOL] knob: Rotate to adjust volume; short 8 press to turn off/on audio device. 9 [AUDIO]button: To enter audio selection screen or Audio Mode. ]Day/night button: Press to switch between day or 0[ night mode. ! [MAP] button: Press to enter the map screen.
Basic method of use mobile phone mode. Switching the language 2 Touch to enter Settings Screen. English When the unit turns on, the default language is set to English. Switch to your language to use the unit. 1 Press [MENU] button on the panel. . 3 Touch 4 Set the clock you need. Mode Switch 3 Touch or slide the screen. ■Switch to navigation mode Press [MAP] button on the panel to switch to navigation mode for map display.
zz Change page by dragging left or right or touch and . English Adjust Volume 1 Turn the [VOL] knob on the panel to adjust the volume. Basic Operations Main menu operations On main menu screen you can enter corresponding work mode by touch the icons on the screen. 1 Press [MENU] on the panel or touch to enter main menu screen. zz Source mode: Adjust the volume of source.
pair the mobile phone with this unit. 1 Touch to enter Phone setting screen. English zz When there is no Bluetooth pairing equipment record, the items “Connect with Bluetooth” and “Select Device” will be invalid. Bluetooth Settings Pair Bluetooth Mobile Phone or Bluetooth Audio Device / check the list of paired equipment/Set Bluetooth system of this unit.
English z After the screen display is OFF, the buttons on the panel are still operational. Press ] button on the panel will resume [ the previous source play screen or map navigation screen. Or you can press any button for the corresponding operation. ground colour adjustment screen. to enter brightness 3 Touch adjustment screen. 2 Touch , , , , adjust the tone quality. or to or to change z Touch the background colour. Display Adjustment Adjust the display effect of the screen.
Voice Recognition settings 1 Touch or to adjust the vol2 Touch ume. to turn on or off 3 Touch button beeps. to turn on or off 4 Touch guidance voice . to enter Voice Recognition settings screen. ple CarPlay. Once Apple CarPlay is started, some NissanConnect features will be replaced or disabled by CarPlay including : NissanConnect Apps, iPod on USB Hands Free phone, Bluetooth Audio and navigation guidance on the Vehicle Information Display. 1 Touch to enter Apple CarPlay settings screen.
displays Apple CarPlay Help information. English Source Media Mode 1 Press [AUDIO] button on the panel to enter source or touch 1 Back to source screen. 2 View station list, RDS Info and turn on or off HD radio mode. 3Preset channel list(Station list). Up to 12 channels can be saved. SXM mode Before to enter this mode you need to check the antenna. 1 Touch to enter SiriusXM screen. screen. saved. 7 Switch the play mode between replay and live. 8 SiriusXM signal intensity.
Long touch: Fast Forward. 7Turn on or off shuffle play. 1 Touch to enter iPod audio screen when you connect an iPod. AUX mode Before playing Bluetooth Audio you need to pair the audio device with this unit. 1 Touch to enter Bluetooth Audio screen. Insert the external sound device into AUX slot via the audio cable. 1 Touch to enter AUX mode. 1 1 2 2 2 Choose “Low”, “Middle” or “High” input sense of auxiliary device. 3 4 5 6 7 1Back to source screen.
Bluetooth Telephone 1 Touch to enter Phone screen. English 2 If you want to select the mobile phone 秋to pair, touch . 4 After entering the PIN, touch and operate as per the information prompted. 3 If you want to select the audio device秋to pair, touch , and you have to edit the PIN (minimum 4 digits and maximum 16 digits) to pair the audio device. 5 After successful pairing, it will automatically return to Bluetooth Setting screen. 14 to edit and 2 Touch delete Quick Dial number.
Navigation Menu Types and Operation Touch on the map screen to display the Map menu at the left side of the screen. You can store the current location to the Address Book or change the map appearance. 1 2 3 4 5 1 [BACK] key:Return to the map screen. [Save Location] key:Save the cur2 rent location in the AddressBook. 3 [Nearby POIs] key:Displays the Category screen of the POIs nearby the current location. [Map View] key: Change the types 4 of the screen and map appearance.
English ■Indicators on the map Indicators displayed on the Map screen are different according to the conditions at that time.This section explains the main indicators displayed on the Map. The 2D map is a map screen represented to the plane just like the map of atlases. It is suitable for searching a destination and confirming the road or route. ● 3D Map Indicators on the map of the current location 1 the map orientation.
ling is started, the guidance route and various guidance information are displayed on the map. English 1 map towards the touched direction. For the 3D map, touch the upper part of the map to scroll the map toward the touched direction, and touch the left or right part to rotate the map while touching. 2 3 1 Small Turn Arrow display:Displays the turning direction and distance to the next guidance point.
zz Touch the corresponding key to change the map view. to display the 3 Touch View Settings screen. Screen examples • 2D Map 2D/3D Map English • 3D Map zz [Intersection]:During the route guidance mode, displays the Intersection Close-up display which displays the turning direction of the next guidance junction at the left of the screen. zz [Turn List]:During the route guidance mode, displays the list of the name, distance, and turning direction of the guidance junctions at the left of the screen.
zz This control is available when [2D] is selected. zz This control is available when [2D] is selected and the Map Orientation is set to Heading-Up. ●●[Map Colour] key:Selects the colours(Map Colour 1/2/3/4) of the map. ●●[Map Text Size] key: Change the map text size(Large, Medium,Small). ●●[Birdview Angle] key: Changes the angle of the 3D map. Touch to raise the angle, and the angle. to lower Navigation System Settings 1 Press [MENU]/[MAP]/[AUDIO] button on the panel to display the function bar.
■Home Location Register your home address. You can edit the registered home address. English To register the Home Location The Home Location can be registered when the key is displayed. 1 Touch . Search for the location of 2 your home by a similar way as for entering destinations. the Map screen. to delete the regis4 Touch tered Home location. to register it. 5 Touch ■Stored Locations Registers locations in the Address Book.
To register an Avoid Area 1 Touch . . 2 Touch 3 Search the area to avoid by a similar way as for entering a destination. to register it. 4 Touch To edit an Avoid Area 1 Touch . 2 Touch the name of the Avoid Area you wish to edit. 3 Touch the desired item to edit, and edit it by similar way as for registering Avoid Areas. ● [Rename] key:You can change the name of the Avoid Area. Enter the name, then touch . ● [Move Location] key:You can ad- just the location of the Avoid Area.
appearance” on Page 第17页 . English ■Map Icons Switches ON or OFF Landmark icon display for each type. 1 Touch . Touch the desired item key you 2 wish to change the setting. 3 The types of icons that can be set are the following 6 types. ●● [Restaurant] key ●● [ Station] key ●● [Hotel] key ●● [ATM] key ●● [Rest Area] key ■Guidance Settings You can change settings concerning the guidance. 1 Touch to enter Guidance Settings screen. 2 Touch the desired menu item to set.
■Others 1 Touch to enter the Others settings screen. ●●[Map Scrolling Information] key: When you scroll the Map screen and move the cursor on an icon, the information on the location can be displayed. You can set this function whether to activate or not. zz zz zz zz [Address Book Icons] key [TMC Traffic Icons] key [Destination/Waypoint Icons] key [Latitude/Longitude Info.] key ●●[Customize nearby POIs] key:You can customise the five categories of the Customize nearby POI feature.
English For other destination entering methods, please refer to “Entering the Destination” on page 第25页. 1 Press [MENU]/[MAP]/[AUDIO] button on the panel to display the function bar. to enter Destination 2 Touch screen when no route exist. Note: GG You can omit the state/province name entry and directly enter a road name. Proceed to step 9. to enter the city name 5 Touch you wish to go to by touching characters on the screen. Then, the system returns to the Street Address screen.
Entering the Destination Searching Your Destination from the Destination Menu You can search for a destination from the Destination menu by using various methods. Use a suitable search- ing method according to the place you wish to go to. Destination menu screen 1 Touch . 2 Touch your desired category. An example of specifying RESTAURANT is explained below. English guidance. ●●[Route Details] key: The Calculate Route menu is displayed.
1 Touch . English . 2 Touch The route to your home is automatically calculated and the route guidance is started. ■By Previous Destination The destinations previously used are registered in the previous destination list (up to 100 locations). You can enter a destination by selecting it from this list. When the previous destination list exceeds 100 items, the oldest entries are automatically deleted. 1 Touch . 2 Touch the place you wish to go from the displayed history list. .
■By Intersection An intersection of any two streets can be set as the destination. 1 Touch . searched by the phone number. GG Residential phone numbers cannot be used to search for a location. 1 Touch . Enter the phone number including the area code, and then touch . 2 Touch the place you wish to go from the displayed place list. . 3 Touch 2 Enter the 1st street and the 2nd street, then touch . 3 Touch ■By Freeway Entrance/Exit The entrance or exit of a freeway can be set as the destination.
English to the place you wish to go to. Touch . 2 Confirm the location of the destination, then touch . Route Guidance After you have entered the destination and started the route guidance, you will be guided along the route by screen display and by voice. Route Guidance Screen Features ●●[More Routes] key: You can change to other suggested routes with a different priority condition. ●●[Route Info] key: Shows the information of the suggested route selected on the screen.
About the Voice Guidance After starting the route guidance, not only guidance by screen but also guidance by voice, such as the turning direction or the distance to the guidance point, will be given when you get near to the guidance point. You can set whether to use the voice guidance or not, and set the volume to be changed according to the vehicle speed.
1 Touch to enter the Edit Route screen. English ●●[Turn List] key: Display the list of route information. The guidance points from the current location to the destination are displayed with the list format. ●●[Simulation] key: Simulate the route guidance with moving the vehicle mark automatically on the Map screen. ●●[Store Route] key: Store the specified route. A maximum of 5 routes can be stored, and they can be easily retrieved.
1 Touch . The About Information This screen sets or displays various information that is helpful for using the vehicle safely and comfortably. 1 Press [MENU] button on the panel. to enter Info screen. 2 Touch English ■Setting a diverted route using traffic information The route with traffic information considered is automatically calculated, and the route guidance will be restarted. diverted route is displayed with TMC traffic information taken into account.
