User Guide

Clarion Advanced Technology Corporation
20 Empire Drive, Lake Forest, CA 92630-2244 - USA
RGBNTSC
CONVERTER
DEALER
INSTALLATION
The RGBNTSC converter is used
when a composite (NTSC) screen is
to be used for large screen
Navigation applications.
This unit should be mounted under
the dash or somewhere near the front
screen. To hook up the converter,
connect the RGB cable from the back
of the main unit and the other end to
the converter. Use the RCA cables
provided with the monitor and
connect one end to the monitor and
the other end to the converter. Now
hook up the ACC power and ground
as shown in the schematic below.
The unit has ACC, power and ground
that must be connected. The yellow
power wire must be connected to 12V
main power, red is connected to ACC,
and the black ground wire must be
connected to a ground connection.
RGB Cable
Part # YX-X01-M008
Monitor
RCA Cable
RCA Cable
to Monitor
Power Cable
Part # YX-X01-M009
Red
Yellow
Black
RGB Cable
RGB Cable
RGBNTSC 08 2001