Owner's manual

6 VMA6593
6. INSTALLATION AND WIRING
1. Before Starting
Read these instructions and the following precautions care-
fully.
WARNING!
Be sure to disconnect the battery (-)
terminal before starting. This is to
prevent short circuits during installa-
tion.
Precautions
• This unit is exclusively for cars with a negative ground, 12V
power supply.
• Do not open the case. There are no user-serviceable parts
inside. If you require asistance, consult your Clarion dealer
or an authorized Clarion service center.
• Use a soft, dry cloth to clean the screen. Never use a
rough cloth, thinner, benzene, alcohol, or other solvent. The
screen surface is easy to scratch - do not rub it when
cleaning.
2. Package Contents
1 VMA6593 monitor unit
2 Flush-mount trim bezel
3 Wiring harness
4 Owner’s Manual / Installation Guide
3. Installation Requirements
WARNING!
Never install this monitor where it is
visible from the driver’s seat, or where it
could injure any vehicle occupant in
case of an accident. Ensure that your
installation does not create risk of head-
strike injury, and that the monitor will
remain securely mounted in the case of
an accident or sudden maneuver.
VMA 6593 122302.p65 12/23/02, 10:36 PM6