Owner`s manual
Basic
Operations
Adjusting
the MID
The MID gain, MID frequency (center
frequency) and MID Q can be adjusted as
follows.
1. Press the [ADJ} button, then touch the
[AUDIO}
key.
2.
Touch the [MID}
key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the
LA.]
or
[
.....
] key to adjust to
desirable level.
GAIN :
-6
to 6 (The factory default setting
is
"0")
FREQ. : 700Hzl1 kHz/2kHz (The factory
default setting is
"1
k")
Q : 1.5/2 (The factory default setting is
"2")
5.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ] button.
Adjusting
the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
1.
Press the [ADJ] button, then touch the
[AUDIO]
key.
2. Touch the [TREBLE]
key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the
LA.]
or [
.....
] key to adjust to
desirable level.
GAlN :
---6
to 6 (The factory default setting
is "0")
FREQ. : 8kHz/12kHz (The Factory default
setting is "12K")
5.
Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ] button.
Adjusting
the
non
fader
output
volume
You
can adjust the volume output from the unit's
non fader output terminal.
1.
Press the [ADJ] button, then touch the
[AUDIO]
key.
2. Touch the [NON FADER VOL]
key.
26 VRX745VD
3.
Touch the
[.,]
or [
.....
] key to adjust to
desirable level.
*The factory default setting is "0". (Setting
range:
-6
to
6)
4.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ] button.
Turning
on/off
the MAGNA BASS
EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1.
Press the [ADJ] button, then touch the
[AUDIO]
key.
2. Thouch the
[MeB
EX]
key.
Each time you touch the [Mea
EX]
key,
you
can switch between "ON" and "OFF". When
the MAGNA BASS EX effect is turned on,
"MeB
EX"
lights
in
the display.
3. Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ] button.
Adjusting
the MONITOR
Adjusting
the
brightness
and
tone
of
color
Notes:
• This function is not available when the display is
stored.
• The
HUE
setting can
be
adjusted only when the
NTSC mode is selected.
• Switch
to
the VISUAUDVD player(DVD video
or
video CD)/DVD changer
lTV
mode you see.
1.
Press the [ADJ] button to switch to the
ADJUST MODE menu.
2.
Touch the [MONITOR]
key.
3.
Touch the [MONI
ADJ]
key to display
[BRIGHT], [HUE] and [COLOR]
key.
Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.
•
"BRIGHT":
Adjust the brightness of the display.
•
"HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the
car
is stopped
and
the parking brake is applied.