Owner`s manual

Basic Operations
Clock Adjustment
1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.
2. Touch
the [GENERAL] key.
Touch the [CLOCK] key to adjust the time.
3. Touch the
[A], [.... ], [a.m] or [p.m] key to
adjust the time, then touch the [SET]
key.
* The time is displayed in 12-hour format.
4. Touch the [RTN]
key, [ESC] key, or press the
[ADJ] button.
Setting the Auto Panel
When you remove or attach the DCp, you can
set
the liquid crystal panel automatically housing
or opening.
*The factory default setting is "ON".
1. Press the [ADJ] button to select the ADJUST
MODE menu.
2. Touch
the [GENERAL] key.
Touch the [AUTO PANEL] key to set "ON",
"OFF"
or "CLOSE".
ON: The liquid crystal panel houses
automatically after removing the
DCP.
And the liquid crystal panel open
automatically after attaching the
DCP.
OFF: Normal operation.
CLOSE: The liquid crystal panel houses
automatically after removing
the
DCP.
3. Touch the [RTN]
key, [ESC] key, or press the
[ADJ] button.
Switching CONNECT(connect)
Make the following settings when an external
device is connected to the Visual terminal.
NAVI:
when a navigation system is
connected
*When a navigation system is
connected, use the monitor lock
function. Locking the monitor locks
the screen size in
F.WIDE mode (fUll
wide) and the VTR system to NTSC.
OTHERS: for external devices other than a
navigation system
NONE: when no external devices are
connected
*The factory default setting is "NONE".
1. When the panel is open, press the [ADJ]
button to display the ADJUST MODE menu.
2. Touch the
[GENERAL] key.
Touch the [CONNECT] key to select "NAVI"
or "OTHERS" or "NONE".
3. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Time setting in air conditioner
operation mode
This setting can be used to adjust the time the
panel stays
in the horizontal position when in
the air conditioner operation mode.
• The factory default setting is "10s".
1. Press the
[ADJ] button.
2. Touch
the [GENERAL] key.
3. Touch the [HVAC MODE] key to set to "55,"
"105,"
or "305."
4. Touch the [RTN] key, [ESC]
key, or press the
[ADJ] button.
VRX745VD 29