Owner`s manual
Radio Operations
FM reception
For enhanced FM performance the
mRIiI:rUNEC:=
® tuner includes signal actuated stereo control,
Enhanced Multi AGe, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Listening
to the radio
1.
Press the [FUNC] button and select the
Radio mode. The frequency is displayed.
2.
Press the [BAND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes
in
the
following order:
FM1
-+
FM2
-+
FM3
-+
AM
-+
FM1
...
3.
Press the
[<
....
] or
[~>]
button to tune
in
the
desired station.
Seek
tuning
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Tune
in
to a station.
:(.
If
"MANU"
is
lit
in
the
display,
press
and
hold
the [BAND] button for 1 second or longer.
"MANU"
in
the display goes off
and
seek
tuning
is
now available.
:(.
The same operation
is
also available
by
using
the
[BAND]
key.
3.
Press the
[<
....
] or
[~>]
button to
automatically seek a station.
When the
[~>]
button is pressed, the station
is sought
in
the direction of higher
frequencies; when the
[<
....
] button is
pressed, the station is sought
in
the direction
of lower frequencies.
:(.
The same operation
is
also available
by
using
the [
........
] or
[~~]
key.
Selecting
stations
with the KEY
PAD
:(.
This function displays the
KEY
PAD
on
the screen
enabling
you
to
tune
by
entering a frequency.
30 VRX745VD
1.
Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the
[0]-[9] key corresponding with the
frequency you desired. When you touch the
wrong number
([0]-[9] key), you can cancel
that to touch the [CLR]
key.
3.
Touch the [ENT]
key.
The radio station you
required would be tuned.
4.
Touch the [ESC]
key.
Manual
tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are
in
the step tuning mode, the
frequency changes one step at a time.
In
quick
tuning mode, you can quickly tune the desired
frequency.
1.
Press the [BAND] button and select the
desired band. (FM or AM)
:(.
If
"MANU"
is
not lit
in
the
display,
press
and
hold the [BAND] button for 1 second or longer.
"MANU" appears
in
the display
and
manual
tuning
is
now available.
:(.
The same operation
is
also available
by
using
the
[BAND]
key.
2.
Tune into a station.
•
Quick
tuning:
Press and hold the
[<
....
] or
[~>]
button for 1
second or longer to tune
in
a station.
• Step
tuning:
Press the
[<
....
] or
[~>]
button to manually
tune
in
a station.
Recalling a
preset
station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
There are 2 ways available to recall the preset
station.
•
Using
the
[DIRECT]
button
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Press the corresponding [DIRECT] button to
recall the stored station.
:(.
Press
and
hold one
of
the
[DIRECn
buttons
for
2 seconds
or
longer
to
store that station
into preset
memory.