Owner`s manual
DVD Changer Operations
Only basic operations
of
DVD
changer
can be
performed from the unit. Use
the
remote control
unit to perform the following functions.
• SCAN, REPEAT, RANDOM function
• V-CD PSC function
ON/OFF
• DVD
SETUP
function, AUDIO, SUBTITLE,
ANGLE
setting function
For detalls
on
operations other than those
described below, see DVD player Operation.
For detalls
on
DVD
changer precautions, refer
to
the
supplied owner's manual.
Note:
• When the
DVD
changer (VGZ625) is connected
via optical cable, no sound will be output
if
AUDIO
OUT
is switched to ANALOG on the changer's
"GENERAL SETUP" menu.
Selecting a
disc
When
the
panel
is
closed:
Each
of
the [DIRECT] button corresponds to a
disc loaded into the DVD changer.
Press the [DIRECT] button
(1
to 6) and select
the desired disc.
When
the
panel
is
open:
Touch
the
[LIST]
key,
otherwise press the [DISC
SEL]
button
on
the remote control unit.
Touch
the
[DIRECT] key
(1
to 6) in the display
or
press
the
numeric button for the disc
number
(1
to 6) on
the
remote control unit to select the
desired disc.
Switching
to
a
next
disc
(Disc Up function)
The
disc up function plays from the first track
(track No.1) of the next disc.
Press the
[BAND]
button.
Each time you press the
[BAND]
button, the
disc
changes to the next disc.
TV Operations
TV
functions
When an optional
TV
tuner
is connected through
the
CeNET
cable, this unit controls all
TV
tuner
functions.
To
watch
TV
requires a
TV
tuner.
For
your
safety,
the
driver
should
not
watch
the
TV
or
operate
the
controls
while
driving.
Please
note
that
watching
and
operating
the
TV
while
driving
are
prohibited
by
law
in
some
countries.
Watching TV
Note:
• For your safety, the VRX745VD has a safety
function which turns
off
the picture when the
car
is moving, so only the audio can be heard. The
picture can onlybe watched when the
car
is
stopped
and
the parking break is applied.
1.
Press the [FUNC] button and select the
TV
mode.
2. Press the
[BAND]
button to select the
desired
TV
band (TV1
or
TV2). Each time
the button is pressed, the input selection
toggles between TV1
and
TV2.
3. Press the [.->]
or
[<
...] button to tune
in
the
desired
TV
station.
*When the panel is open, the same operation
is also available by using the [
........
]
or
[.-~]
key.
Watching a video
The
TV
tuner
has
a
VTR
input terminal to which
1 external device can
be
connected. Connect a
12V video cassette player (VCP)
or
video
cassette recorder (VCR) to the
TV
tuner
input
terminal.
1.
Touch the screen to display the menu, then
touch the [SUB]
key.
2. Touch
the
[EXTRA
SELECT]
key in
the
menu screen when the "VTR" is displayed.
3.
To
return to the
TV
broadcast, touch the
screen again and touch the
[EXTRA
SELECT]
key in the menu screen.
VRX745VD 47