Manualshelf

Owner`s manual

ManualsBrandsClarion ManualsAutomotiveVRX74SVD
51525354555657585960
5. 1
ch
Surround
Decoder
Operations
.SPEAKER
GAIN
This function sets speaker output level.
*This function is not available for speakers whose
SPEAKER SEL setting
is
set to OFF.
3-1. Touch the
[SPEAKER
GAIN]
key to show
the submenu.
3-2. Touch the [FRONT L], [CENTER], [FRONT
R],
[SURROUND
R],
[SURROUND
L] or
[SUB
WOOFER]
key to set respective item.
3-3. Touch the key to make adjustments
in
the
range
-10
dB to +10 dB in 1 dB step
increments. The default value is "0
dB"
.
•
DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
* This function
is
not available for speakers whose
"SPEAKER SEL" setting
is
set
to
OFF. .
3-1. Touch the [DELAY] key to show the
submenu.
3-2. Touch the [CENTER SP] or [SURROUND
SP] key to set respective item.
[CENTER SP]:
Adjustments are made
in
the range 0 ms to
5 ms.
The
default value is "0 ms".
[SURROUND
SP]:
Adjustments are made
in
the range 0 ms to
15 ms.
The
default value is "0 ms".
•
OOLBY
D
This function sets the dynamic range
compression.
* This function
is
not available for speakers whose
"SPEAKER SEL" setting
is
set to OFF.
3-1. Touch the
[DOLBY
D] key to show the
submenu.
3-2. Touch the [MAX], [STD]
or
[MIN] key to
select respective item.
*The default value
is
[MAX].
4.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ] button.
DSFmode
DSF
effect
ON/OFF
* The factory default setting
is
"OFF".
1.
Press the
[ADJ]
button and touch the
[AUDIO]
key.
2. Touch the [STATUS]
key.
3.
Touch the [DSF] key to select "ON" and
"OFF".
4.
Each time the [DSF] key is touched, the on
and off statuses are switched alternately.
5.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
Note:
• If the
DSF
effect is
set
to
OFF,
the adjustment
made in "DSF" is not reflected in the music
source.
Selecting
the
DSF
type
1.
Press the
[ADJ]
button and touch the
[AUDIO] key.
2.
Touch the key for the desirable type to select
it.
3.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
P.EQmode
P.EQ
effect
ON/OFF
*The factory default setting
is
"OFF".
1.
Press the
[ADJ]
button and touch the
[AUDIO]
key.
2. Touch the [STATUS]
key.
3.
Touch the [P.EQ] key
to
select "ON" and
"OFF".
4.
Each time the [P.EQ] key is touched, the on
and off statuses are switched alternately.
5.
Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
Note:
•
If
the
P.
EO effect is
set
to
OFF,
the adjustment
made in "P.EO" is not reflected in the music
source.
VRX745VD 55