Owner`s manual

Names of Buttons
Note:
• Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold).
[VOL] button
• Use this button to increase/decrease the
volume.
[DISP] button
• Use this button to switch the indications such
as play status on the information panel.
[OPEN] button
• Use this button to open/close the liquid crystal
panel.
• Press and hold this button for about 2
seconds or longer so that the liquid crystal
panel is positioned horizontally when the
liquid crystal panel is open (Air Conditioner
Operation mode).
[FRONT OPEN] button
• Use this button to open the Front panel.
[SENSOR]
• Remote control infrared sensor.
[ISR] button
• Use this button to enter the ISR (Instant
station recall) standby mode.
• Press and hold this button for 2 seconds or
longer to store the current station into
ISR
memory in the radio mode.
[DIRECT] button
• Use this button to select a preset channel in
the radio/SIRIUSrrV mode.
• Use this button to select a disc
in the changer
mode.
• Press and hold one of the [DIRECT] button for
2 seconds or longer to store the current
station into preset memory.
[<~], [..->] buttons
• Use this button to tune to a station in the
radio/SIRIUSITV mode.
• Use this button to select a track
in the CD,
Video CD, MP3 and CD changer mode.
• Use this button to select a chapter
in the DVD
video and DVD changer mode.
6 VRX745VD
[~/II] button
• Press this button to enter the play pause
mode
in the DVD video mode and changer
mode. Press the button again to resume
playback.
• Press and hold this button for 1 second or
longer to mute the sound
in the DVD video
mode and changer mode.
• Press this button to mute the sound
in the
radio/SIRIUSITVNISUAL mode.
[BAND] button
• Press this button to switch the receiving
bands for radio/SIRIUSITV mode, etc. Press
and hold this button for 1 second or longer to
switch the SEEK/MANUAL tuning modes.
• Use this button to move to the first track
on a
disc in the DVD video mode.
• Use this button to switch to the next disc
in
the changer mode.
[FUNC] button
• Press this button to turn on the power. Press
and hold this button for 1 second or longer to
turn off the power.
• Press this button to switch the modes such as
radio.
[ADJ] button
• Shows the ADJUST MODE menu to change
the settings when the liquid crystal panel is
open.
• Press and hold this button for 1 second or
longer, the liquid crystal panel can be
switched to a composite screen to lock the
monitor.
(To enable this function, go to the
GENERAL menu (within the ADJUST MODE
menu), and use the [CONNECT] key to select
"NAVI" or "OTHERS").