Owner`s manual

-5. INSTALLING THE MAIN UNIT
• Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown
in Figure 6.
2. Wire as shown in Section 8.
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
Screwdriver
Hole
Notes:
1) Some car models require special mounting kits
for proper installation. Consult
your Clarion
dealer for details.
2) Fasten the front stopper securely
to prevent
the main unit from coming loose.
Rear fastening hole (of vehicle)
Instrument panel
Universal mounting bracket
Stoppers
Note: Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge
of
the main unit.
Figure 6
VRX745VD 63