Owner's Manual

4. Touch your desired
Cellular
button to
select
the button for the
cellular
phone to be
registered, and
touchi+Qiip]
button
to
register for the
Bluetooth cellular
phone.
•
You
cannot
select
the
Cellular button
of
which another
cellular
phone is
already
registered. Select a
blank Cellular button.
5.
If entering the Pass Key code is prompted on your
cellular phone, enter the Pass
Key code set in this unit.
•
You
can change the Pass key setting
of
this unit from the Bluetooth Info screen
under the
Telephone
Settings screen.
When the pairing operation completes,
the registered cellular
phone is set as the
current
telephone,
and
the
display
returns
to
the
Telephone screen.
•
To
delete
the
cellular phone registration
1
. Touch the button to delete
the device. A confirmation screen is
Select the Cellular Phone
To
change the current
cellular phone to the other device which is already
registered,
perform the following
operation.
1. Touch the
~
button to display
the Device
Select
screen.
2.
Touch the
currently connected device, then touch
0
eut
h
button
to
disconnect
the active device.
3.
Touch the desired Device button you wish to use. Touch
II
'""""
"
II
button to
select
it as your active device. The corresponding
cellular
phone is set as the current
telephone.
• If
the power
of
the
cellular
phone is not turned on, turn
it
on.
•
The
cellular phone may prompt to
acknowledge
the
Bluetooth
connection
or
to
enter the Pass Key code
of
this unit. Perform these operations according to the
message displayed.
Obtaining the Phone
Book
Data
Sending the Phone Book data from the
cellular
phone
enables
you to make a
call
using the Phone Book function from this unit.
Telephone Operations
Making a call using the Ten-Key pad
1. Touch the
U
button to display the Ten-Key pad screen.
2. Enter the telephone
number
by
using the Ten-Key pad
displayed
on the screen.
Using
Siri
Eyes Free Function
You
can use the
Siri
Eyes Free function by the
following
operation.
1. Turn on Siri
setting of your iPhone.
2. Press
and
hold
the
[VOICE]
button
until
you hear the warning tone.
The indicator change as
follows.
VX405
21