Owner's Manual

Installing
the
Main
Unit
in
TOYOTA
Vehicle
Install
by using parts attached to the
vehicle.
(Screws marked
*
are attached to the
vehicle.)
(*1)
(1
pair for the
left
and
right sides)
*1
. Some
panel
openings are too
small
for the unit depending on the
vehicle
type
and
model.
In
such a case, trim the upper and
lower
sides of the
panel
frame by
about 0.5
to
1.5
mm so the unit can be inserted smoothly.
*2.
If
a hook on the
installation
bracket interferes with the unit, bend and
flatten
it
with a nipper or
similar tool.
.-----------
Typical
Mounting Brackets
Example
1
Example
2
Example3
Affix the screws to the
e marks.
WIRE CONNECTION
Note:
•
Before installing, be sure to disconnect the negative cable
of
the
car
battery.
•
In the optional devices, the RCA cables
and
the Connector
cables are separately-sold items.
•
When connect the HOM/
cable,
be
sure to fix with the clamp.
VX405
VX405
31