Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Benutzerhandbuch & Installationshandbuch Manuale dell’utente e manuale di installazione Gebruikershandleiding en installatiehandleiding Manual de instrucciones y de instalación Ägar- & installationshandbok Manual do utilizador e manual de instalação Betjeningsvejledning og installationsvejledning VX709E 2-DIN DVD MULTIMEDIA STATION WITH 7-inch TOUCH PANEL CONTROL STATION MULTIMEDIA DVD 2 DIN AVEC COMMANDE PAR ECRAN TACTILE 7 pouces
CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Thank you for purchasing the Clarion VX709E. English • Please read this owner’s manual thoroughly before operating this equipment. • After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). • Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents VX709E 1 Owner’s manual 1. FEATURES .................................................................................................................... 2 Expanding Systems..........
English 1. FEATURES Owner’s manual ■ Built in Bluetooth® Handsfree (HFP & OPP) and Audio Streaming (A2DP & AVRCP) ■ USB Direct Connection for iPod® ■ NAX983HD (CeNET HDD Navigation) and NP509E (Hide-away Navigation) Control with Touch Panel Expanding Systems Expanding audio features Expanding visual features Rear Vision Camera (CC2011E/CAA185) Rear Monitor 4-Channel Amplifier VTR etc.
English Playable discs This DVD player can play the following discs: Playable discs Audio CDs Owner’s manual DVD video discs CD TEXT In addition, the DVD player can play CD-R/RW, DVD-R/RW, and DVD+R/RW discs on which the following media files have been recorded: Playable media files MP3 ID3 TAG WMA AAC DivX For detailed information, see the sections entitled “MP3/WMA/AAC Operations” (page 40) and “DivX Operations” (page 43).
English DVD video features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Owner’s manual Note: • The functions described in this section differ depending on the DVD video disc. Refer to the instructions provided with the DVD video. • Some disc functions may operate differently from described in this manual. Multi-sound function DVD video can store up to 8 languages for one film; select the language of your preference.
English 2. PRECAUTIONS WARNING 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc (DVD/CD), wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
English Operation panel/Generalities For a longer service life, be sure to read the following cautions. Owner’s manual • The operation panel will operate properly in a temperature range of 0 to 60qC. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Subjecting the operation panel to shocks may result in breakage, deformation or other damage.
English About the registered marks, etc. Owner’s manual • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. • Manufactured under license from Dolby Laboratories.
English 3. CONTROLS ●Operation panel Owner’s manual Blink LED [ ] (OPEN/CLOSE) [TA] Microphone Sensor [MAP] [ [MENU] ] [SRC] ●With the operation panel open Reset button Functions of Buttons Note: • Be sure to read this section while referring to the front diagram. Sensor • Receiver for the remote control unit (operating range: 30° in all directions). [o] (EJECT) button • Use this button to eject the disc set in this unit.
Functions of Buttons [MENU] button • Press this button to display the Menu screen. You can change the system settings from this screen. • When displaying the General Settings screen, keep pressing this button more than 2 seconds to display a screen for entering your personal code of the anti-theft function. [MAP] button*1 • Pressing this button in the audio/visual modes changes to the Navigation mode. [ ] (Voice/SEND/END) button*2 • When a call comes in, press this button to answer the call.
English Outline of Button and Touchkey Operation Turning the power on Owner’s manual Engine ON position System check The CeNET format utilized on this unit is provided with a system check function. When the system check function is performed under the following conditions, the power is automatically turned off. Press the [SRC] button again. • When power is first turned on after initial installation. • When an external device is connected or disconnected. • When Reset button is pressed.
Outline of Button and Touchkey Operation English TUNER mode operation (Source screen) Owner’s manual Switches the radio band. Selects Home/Travel modes. Manual tuning Seek tuning (Options screen) (Preset List screen) (PTY Select screen) • Select desired station after selecting radio band.
Outline of Button and Touchkey Operation English DVD Video mode operation (DVD Video mode screen) *2 Owner’s manual (Source screen) * Screen during DVD Video mode when automobile moving. (Options screen) (DVD Setup screen) Note: *2 When playing a DVD video movie, touching the screen surface will cause the DVD Video mode screen to be displayed.
Outline of Button and Touchkey Operation English Bluetooth telephone operation Owner’s manual (Menu screen) (Telephone screen) (10Key screen) • To make a call, enter the telephone number using 10-Key Pad, then touch the [ ] (Send) key. (Cellular Select screen) Register your Bluetooth cellular phone beforehand. • Touch your desired Telephone key to select the telephone to be used.
Outline of Button and Touchkey Operation English Adjusting the General settings Owner’s manual (Menu screen) (General Settings screen) (Wall Paper tab screen) (Display tab screen) (System tab screen) 14 VX709E
Outline of Button and Touchkey Operation English Adjusting the Audio settings Owner’s manual (Menu screen) (OTHERS tab screen) (Audio Settings screen) (BAL/FAD tab screen) (DZE tab screen) (TONE tab screen) VX709E 15
English Remote Control Unit Names of buttons Owner’s manual Signal transmitter Operating range: 30° in all directions [SUBTITLE] [AUDIO] [ANGLE] [MENU] [TOP MENU] [E], [e], [T], [t] [ENT] [RETURN] [SOURCE] [BAND] [6] [–], [+] [R], [F] Inserting the Battery 1. Slide the rear cover in the direction of the arrow, and remove it. 2. Insert the CR2025 battery bundled with the remote control unit in the directions shown in the figure, then close the rear cover.
Remote Control Unit You can use the remote control unit to control the VX709E. When the 2Zone function is ON, the controls work upon the Sub zone only. [AUDIO] button • Press to set the Audio language. (in DVD Video mode) [VOL –], [VOL +] buttons • Decreases or increases the volume. (in any mode; disabled when 2Zone ON) [SUB TITLE] button • Press to display subtitles. (in DVD Video mode) [6] button • Press to play or pause video and audio media.
English 4. BASIC OPERATIONS Note: • Be sure to read this chapter referring to the chapter “3. CONTROLS” (page 8). Owner’s manual Turning On and Off the Power CAUTION CAUTION 1. Start the engine. The power is supplied to this unit. When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Note: • Start the engine before using this unit.
Opening the operation panel and adjusting the angle 1. Press the [7] (OPEN/CLOSE) button. The operation panel will be opened or closed. Adjusting the angle of the operation panel Note: • The operation panel will close automatically when leaving it open for a while. • When the operation panel is open, the touch panel cannot be operated. 2. When the operation panel is moved to your desired angle, release the button. The operation panel will stop.
English Setting/Ejecting a Disc Notes on handling discs Owner’s manual Handling • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Ball-point pen Roughness Cleaning • To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the circumference.
Setting/Ejecting a Disc After setting a disc The system will automatically be switched to the relevant source media mode according to the disc, and start playing back the disc. When a DVD video disc is set: The system is switched to the DVD Video mode. See “DVD Video Operations” (page 31). When an Audio CD is set: The system is switched to the CDDA mode. See “Audio CD Operations” (page 38).
English Connecting/Disconnecting an USB Media Device This unit has one USB (Universal Serial Bus) connector which is compatible with USB 1.1 and USB 2.0. Playable USB media devices Owner’s manual This system can control the following USB media devices connected to the USB connector. • Apple iPod • USB memory About the Apple iPod iPods can be connected by using the connector cable supplied with the iPod, but in this case, you can enjoy its audio sound only.
Connecting/Disconnecting an USB Media Device • For your safety, the driver should not connect or disconnect an USB media device. • Do not start the vehicle’s engine while the USB media device is connected, since it may result in loss or damage to data on the USB media device. Connect the USB media device to this unit after starting the engine. 1. Turn on the power of your USB media device, if required. 2.
English Selecting a Media Source Changing the souce mode Owner’s manual 1. Press the [SRC] button to display the Source screen. 2. Touch the desired Source key you wish to change to. The system is switched to the corresponding source media mode.
About the 2Zone function Note: • When an interrupt of the Bluetooth telephone or the navigation system arises during the 2Zone function is turned on, the sound of the Main zone is muted, but the sound of the Sub zone is output normally. When it arises during the 2Zone function is turned off, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is output from the front two speakers.
English 5. SOURCE OPERATIONS Radio Operations Owner’s manual Listening to the radio 1. Press the [SRC] button, and touch the [TUNER] key. The TUNER mode screen is displayed, and the system resumes the last status of the TUNER mode. 2. Touch the [Home] or [Trav] key to select the Home or Travel mode. The Home/Travel modes are provided to manage the preset stations separately in your home location and in a location during a trip. 3. Touch the [Band] key to select the radio band.
Radio Operations 1. Touch the [Home] or [Trav] key to select the Home or Travel mode. 2. Touch the [List] key to display the Preset List screen. 3. Touch the desired Band key to select the band you wish to store. 4. Tune in the station you wish to store using the seek tuning, manual tuning, or preset tuning. 5. Touch and hold the desired Preset key you wish to store the current station for more than 2 seconds.
Radio Operations English Owner’s manual AF (Alternative Frequency) function TA (Traffic Announcement) function The AF function switches to a different frequency on the same network in order to maintain optimum reception. When a traffic announcement broadcast starts during the TA standby mode, the traffic announcement broadcast is received as top priority regardless of the function mode, so you can listen to it. The Traffic Program (TP) automatic tuning is also available.
Radio Operations Selecting PTY 1. Touch the [Options] key. 2. Touch the [ON] key of the PTY item to enter the PTY standby mode. 3. Touch the [PTY Select] key to display the PTY Select screen. 4. Touch your desired PTY item key to select the program type.
Radio Operations English Owner’s manual PTY seek Country Country Music 1. Touch the [Options] key. 2. Touch the [PTY Select] key to display the PTY Select screen. 3. Touch the [ITEM] key to display the PTY Item screen. 4. Touch your desired Program Type key. 5. Touch a Seek key. If you touch the [F] key, the system seeks a PTY broadcast moving up the frequencies. If you touch the [R] key, it seeks moving down the frequencies.
Selecting the DVD Video mode Changing the DVD System Settings Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning. Displaying the DVD Setup screen 1. Touch the screen to display the DVD Video mode screen. 2. Touch the [Options] key to display the Options menu. 3. Touch the [Set up] key to display the DVD Setup screen. WARNING • Some videos may be recorded at a higher volume level than desired.
DVD Video Operations English Owner’s manual Setting up the screen size Setting up the disc menu language Set up the screen size according to the optional rear monitor which is connected to this unit. • The factory default setting is “Wide”. • The factory default setting is “English”. 4-1. Touch the [Wide], [PS], or [LB] key of the TV Display item to change the screen size to “Wide”, “Pan Scan” or “Letter Box”. ●When watching through a wide type of the rear monitor (16:9) Wide: 4-1.
DVD Video Operations 7673 LUXEMBOURG 7685 MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF 7775 4-1. Touch the [x] key of the Country Code item. MALTA 7784 MONACO 7767 4-3. Touch the [ENT] key. NETHERLANDS 7876 Country code list: (NETHERLANDS ANTILLES) 6578 NORWAY 7879 4-2. Touch the ten-key (0 to 9) to input a 4-digit country code (see the following table).
DVD Video Operations English Setting up the parental level Owner’s manual You can change the level of parental lock (audiovisual restriction). This function allows cutting scenes that are unfavorable for children or replacing them automatically with other scenes prepared in advance. For example, by replacing scenes of radical violence or portrayals of sex with safe scenes, you can make a trouble-free story as if it were so from the beginning. • The factory default setting is “8”. 4-1.
DVD Video Operations ●Operating the DVD menu You can operate the menu items by displaying the Key Pad panel. 1. Touch the screen to display the DVD Video mode screen, and then touch the [Key] key. The Cursor-Key Pad panel is displayed on the screen. • Touching the [Num] key changes the panel to the Numeric-Key Pad. 2. Select the desired menu item using either the Cursor-Key or the Nummeric-Key according to the menu contents. 3. Touch the [ENT] key to specify the selected menu item. 4.
DVD Video Operations English Owner’s manual Slow playback Skipping chapters (searching) 1. Showing the DVD Video mode screen, touch the [p] key during playback to pause playback. 2. Touch and hold the [F] key. While touching the key, slow playback continues at 1/3 speed. Releasing the key resumes the normal playback. • Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback. • You can also use the [F] button instead of the [F] key.
DVD Video Operations Switching among languages On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [Audio] key during playback. Each time you touch the key, you can switch among audio languages. • Depending on the disc, up to 8 audios may be recorded. For details, see the mark of the disc ( 8 : Indicates that 8 audios have been recorded).
English Audio CD Operations This system is a CD TEXT compatible model, and supports the display of the DISC TITLE, TRACK TITLE, and TRACK ARTIST of the CD TEXT. Owner’s manual Note: • This unit supports only CD TEXT in English. Also, some character data may not be reproduced properly on the display. Selecting the CDDA mode 1. Set an audio CD to the DVD player. The system will automatically read the disc data, change to the DVD mode (CDDA mode), and start playback after a while.
Audio CD Operations English Other various play functions Owner’s manual 1. Touch the [Options] key. 2. Touch the [Track] key of the function you want to play. Track repeat playback: Touch the [Track] key of the Repeat item. • This operation plays back the current track repeatedly. • “T.RPT” is displayed on the screen. Track random playback: Touch the [Track] key of the Random item. • This operation plays back all tracks on the disc in no particular order. • “T.RDM” is displayed on the screen. 3.
English MP3/WMA/AAC Operations This system can playback MP3/WMA/AAC files recorded on a disc. About the MP3/WMA/AAC files Owner’s manual What is MP3/WMA/AAC? MP3, WMA, and AAC are the audio file formats which have penetrated into PC users and become a standard format. MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA (Windows Media Audio) is an audio compression method developed by Microsoft Corporation.
MP3/WMA/AAC Operations Note: • For details of the DivX file mentioned below, see “DivX Operations” (page 43). 1 2 1 3 WARNING • Audio files may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting after playback has started. • For your safety, the driver should not operate the controls while driving. Note: • Note that the system enters to the DivX mode when setting a disc with DivX files if the Playform function has been set to “Video” (see page 42).
MP3/WMA/AAC Operations English Owner’s manual Pausing playback Other various play functions 1. Touch the [p] key during playback. Playback pauses. 2. To resume playback, touch the [p] key. Playback resumes. 1. Touch the [Options] key. 2. Touch a touch key of the function you want to play. Folder repeat playback: Touch the [Folder] key of the Repeat item. • This operation plays back tracks in the current folder repeatedly. • “F.RPT” is displayed on the screen.
This system can playback DivX movie files recorded on a disc. • Official DivX® Certified product • Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files. What is DivX? DivX is a popular media technology created by DivX, Inc. DivX media files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks.
DivX Operations English Operating DivX playback Owner’s manual Note: • The most operations in the DivX mode are same as those in the MP3/WMA/AAC modes. See also “Operating MP3/WMA/AAC playback” (page 41). • The random plays cannot be specified in the DivX mode. Watching DivX movies After disc loading, the play mode is automatically engaged. • When playback is not started, touch the [p] key.
English 6. SOURCE OPERATIONS (ACCESSORIES) iPods can be connected by using the connector cable supplied with the iPod, but in this case, you can enjoy its audio sound only. To enjoy video movies stored in the iPod with video displaying them on this unit, it is required to use the special connector cable (CCA-723) separately sold. Note: • This system will not operate or may operate improperly with unsupported versions. • For detailed information on the playable iPod models, see our home page: www.clarion.
iPod Operations English [MENU] key: Displays the iPod Menu screen to search tacks to be played. Various list screens can be displayed from the iPod Menu screen. Owner’s manual [p] key: Use to control playback and pause. [R], [F] keys: Use to perform track selection. Touch and hold to enable fast-forward or fast-backward. List keys: Displays the corresponding list screen. [Playlists], [Artists], and [Albums] are available in the Music mode.
iPod Operations 1. Touch the desired Category key from the iPod Menu screen to display the corresponding list screen. 2. Touch the desired item key on the screen to specify it. • Touch the [c] or [C] key to scroll the list. • When a track list of an Album, Playlist, or Video Playlist is displayed, specifying a track starts playback of the specified album/ playlist from the specified track.
iPod Operations English Viewing video data in the iPod (only for the iPod with video*) Owner’s manual When you connect an iPod with video by using the optional connector cable, you can enjoy the video data stored in the iPod showing them on the monitor screen of this unit (and the rear monitor if connected). * Audio data will not be played back in the Video mode with the fifth generation iPod. WARNING • Some videos may be recorded at a higher volume level than desired.
This system can play audio files (MP3/WMA/AAC) stored in an USB memory which is recognized as “USB Mass Storage Class device”. You can use your USB memory as an audio device by simply copying desired audio files into it. Notes on using USB memories ●General notes • When no data is present, the message “NO FILE” will be displayed. • The USB memory is used with the equalizer function turned OFF. ●Notes on the MP3/WMA/AAC files • This system can play the MP3/WMA/AAC files stored in the USB memory.
English Bluetooth Audio Player Operations Some Bluetooth cellular phones have the audio features, and some portable audio player support the Bluetooth feature. These devices will be called as “Bluetooth audio players” in this manual. This system can play audio data stored in a Bluetooth audio player. Owner’s manual Note: • The Bluetooth audio players are managed separately from the Bluetooth telephones.
Bluetooth Audio Player Operations ●To delete the Bluetooth audio player registration 1. Touch the [Device] key. 2. Touch the [Delete] key to display the Delete the Device screen. 3. Touch the desired Device key you wish to delete. A confirmation screen is displayed. 4. Touch the [Yes] key to perform deletion. Selecting the Bluetooth audio player To change the current Bluetooth audio player to the other device which is already registered, perform the following operation. 1.
English Bluetooth Telephone Operations Owner’s manual When the connection with your Bluetooth cellular phone is established, the following functions are available on this unit: • Listening to your telephone calls on the car speakers. • Answering to an incoming call. • Making a call using the Ten-Key pad screen. • Making a call using the Phone Book data in the selected cellular phone. • Making a call using the History data of the dialed/received calls.
Bluetooth Telephone Operations ●Setting Ring Tone Select The system can ring if the cellular phone cannot generate ring tones when the Bluetooth connection has been established. • The factory default setting is “AUTO”. 2-1. Touch the [AUTO] or [Internal] key of the Ring Tone Select item to set the function. [AUTO]: The system will ring only when the cellular phone cannot generate ring tones. [Internal]: The system will ring regardless of the cellular phone.
Bluetooth Telephone Operations English Registering your cellular phone (Pairing) Owner’s manual You can register up to 5 cellular phones. 1. Turn on the power of the cellular phone you wish to register. 2. Touch the [Cellular] key to display the Cellular Select screen. ●To delete the cellular phone registration 1. Touch the [Cellular] key. 2. Touch the [Delete] key to display the Delete the Cellular screen. 3. Touch the desired Cellular key you wish to delete. A confirmation screen is displayed. 4.
Bluetooth Telephone Operations Making a call using the Ten-Key pad 1. Touch the [10Key] key to display the Ten-Key pad screen. 2. Enter the telephone number by using the TenKey pad displayed on the screen. 3. Touch the [ ] (Send) key to call the entered number. • The following Telephone Interrupt screen is displayed during phone call. • Touch the [Private] key to talk using the cellular phone canceling the hands-free function. To return to the hands-free mode, touch the [Hands Free] key.
Bluetooth Telephone Operations English Making a call using the History Owner’s manual The system will memorize the Dialed/Received calls record data in the memory. You can confirm it and use it to make a call from this unit. 1. Touch the [History] key. The History List screen is displayed. • The items are sorted in the order of the number of times of Dialed/Received calls. • Touch the [c] or [C] key to scroll the list. • Touch the [Back] key to return to the previous screen. 2.
Notes on the NAVI functions [MENU] button • When in the NAVI mode, displays the Menu screen of this unit. [ ] (Voice/SEND/END) button*2 • Pressing this button displays the Voice Command screen of the navigation system. Note: *1 The CeNET Convert Box CCB509 is required to connect the NP509E. *2 This button does not work with the NP509E. NAVI operations Changes between the NAVI display and the Audio/Visual (hereinafter, referred as “AV”) display.
English AUX Operations This function is available when a VTR, etc. is connected to the AUX terminal. WARNING Owner’s manual • For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries. Note: • For your safety, this system has a safety function which turns off the picture when the car is moving, so only the audio can be heard.
English 7. SYSTEM SETTINGS Audio Settings Setting the DZE (Digital ZEnhancer) You can customize the various audio settings of this unit from the Audio Settings screen. 1. Press the [MENU] button. The Menu screen appears. 2. Touch the [Audio] key. The Audio Settings screen appears. This system provides 3 types of sound tone effects stored in memory. You can select desired setting. • The factory default setting is “OFF”. 3. Touch the desired Tab key, and perform the adjustment.
Audio Settings English Adjusting the Tone You can adjust the sound tone by performing the following adjustments. Owner’s manual Note: • These operations are disabled when the DZE (Digital Z-Enhancer) function is set to other than “OFF”. Adjusting the BASS The bass gain, bass frequency (center frequency) and bass Q can be adjusted as follows. 3-1. Touch the [TONE] key to display the TONE tab screen. Adjusting the TREBLE The treble gain and treble frequency (center frequency) can be adjusted as follows.
Audio Settings English Turning on/off the MagnaBass EXtend Owner’s manual The Magna Bass Extend does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. • The factory default setting is “OFF” Note: • This operation is disabled when the DZE (Digital ZEnhancer) function is set to other than “OFF”. 3-1. Touch the [OTHERS] key to display the OTHERS tab screen. 3-2.
English General Settings Owner’s manual Displaying the General Settings screen Setting the VTR system (NTSC/PAL) You can customize the various settings of this unit from the General Settings screen. 1. Press the [MENU] button. The Menu screen appears. 2. Touch the [General] key. The General Settings screen appears. • The factory default setting is “PAL”. Note: • This setting is applied only to the AUX video input. 3-1. Touch the [Display] key to display the Display tab screen. 3-2.
General Settings When an auto antenna which is extended automatically is used, you can set so that it is automatically extended/collapsed according to the power setting of this unit. Note: • This setting is enabled only when the Navigation System is connected to this unit. 3-1. Touch the [System] key to display the System tab screen. 3-1. Touch the [System] key to display the System tab screen. 3-2. Touch the [C] key to display the next screen. 3-2.
General Settings English Setting the anti-theft function (CATS) Owner’s manual “CATS” is the acronym of “Clarion Anti-Theft System”. When you set a PIN code (called as “Personal Code”), a theft is prevented by disabling the operation of the unit at the theft. In addition, set the Blink LED function to improve the effect of the CATS function (see page 62). Setting your Personal Code 3-1. Keep pressing the [MENU] button more than 2 seconds. The Set Code screen appears.
English Adjusting the Monitor You can customize the various monitor settings by the following operations. Setting the Screen mode Note: • When the navigation system is connected, this setting also works upon the Color mode of the navigation system. Adjusting the Dimmer, Bright, Color, Contrast, and Hue level Note: • The Bright, Color, Contrast, and Hue settings can be adjusted only when a video image is displayed on the screen, and the car is stopped with applying the parking brake.
English 8. TROUBLESHOOTING If you have a problem with this system, check the following items to resolve it. See also our homepage (www.clarion.com) for additional information. Owner’s manual General Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed.
DVD Player Measure Another disc is already loaded. Eject the disc before loading the new one. There is a foreign matter already in place. Eject the foreign matter forcibly. Disc is dirty. Clean the disc with a soft cloth. Owner’s manual Sound skips or is noisy. Cause English Problem Disc cannot be loaded. Disc is heavily scratched or Replace with a disc with no scratches. warped. MP3/WMA/AAC files are not encoded properly. Use MP3/WMA/AAC files encoded properly.
English 9. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Owner’s manual DVD Player Display Cause Measure ERROR 2 A disc is caught inside the DVD player and is not ejected. This is a failure of DVD player’s mechanism. Consult your store of purchase. ERROR 3 A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
ERROR 5 (iPod) Cause Measure The connected iPod is not recognized. Disconnect the iPod, and reconnect it again. If the iPod is still not recognized, try replacing with a different iPod. BUS ERROR Over-current or data error is detected. Turn off the ignition switch, disconnect the device, restart the engine and reconnect it again. If the device is still not recognized, try replacing with a different device. DEVICE ERROR The device is connected via the USB Hub.
Input Frequency Range: 87.50 MHz to 108.00 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 32 dB Frequency Response (r3 dB): 30 Hz to 15 kHz Audio input sensitivity: High: 0.65 V (at 2 V output) Mid: 1.3 V (at 2 V output) Low: 2.0 V (at 2 V output) (input impedance 10 k: or greater) Video input: 1.0 r0.
English INSTALLATION AND WIRE CONNECTION MANUAL 1. 2. 3. 4. 5. 6. 7. 8. 9. SAFETY PRECAUTIONS ...............................................................................................................71 BEFORE STARTING ......................................................................................................................73 PACKAGE CONTENTS..................................................................................................................73 GENERAL CAUTIONS ...............
Installation Precautions English WARNING INSTALLATION MANUAL • When installing the unit to a vehicle with an airbag system, never install it in a place where it may affect the operation of the airbag. • Do not install this unit in the following locations: A location interfering with the driver’s visual range or operation. A location where the gear shift or brake pedal are hindered. A location where passengers are at risk. An unstable location, or where the system may fall.
English 2. BEFORE STARTING INSTALLATION MANUAL 1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting. This is to prevent short circuits during installation. (Figure 1) Car battery Figure 1 3. PACKAGE CONTENTS 1 Main unit 2 Manuals Owner’s manual & Installation manual Warranty card 3 Power supply cord 4 Rca pin cord 5 Bag for accessories (No. 1) Flat head screw (M5 u 8) .
English 5. CAUTIONS ON INSTALLATION INSTALLATION MANUAL 1. Prepare all articles necessary for installing the main unit before starting. 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed. Before installing, check that the unit will not hamper operation of the gearshift lever or obstruct your view before selecting the installation location.
2. Wire as shown in Section 8 (see page 78). 3. Reassemble and secure the unit in the dashboard and set the face panel and center panel. INSTALLATION MANUAL This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7.
Installing the Main Unit in a TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION MANUAL Main Unit 8-Hexagonal screw (M5 u 8) Mounting bracket (1 pair for the left and right sides) Center Panel *2 *3 Figure 7 Note: *2 Some panel openings are too small for the unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.
Note: • There are various types of fuse holder. Do not let the battery side touch other metal parts. 5. Connect the CeNET extension cable fully and securely until it locks. When the CeNET extension cable is pulled, hold the slide cap part and pull it towards you. (Figure 9) • When you want to extend the CeNET cable, use extension cable CCA-520 (2.5 m) or CCA-521 (0.6 m) (each of them is sold separately).
English 8. WIRE CONNECTION Note: • Before installing, be sure to disconnect the negative - cable of the car battery. • In the optional devices, the RCA Pin and the Connector cable are separately-sold items. Rear Vision Camera terminal Radio antenna jack CCD-IN INSTALLATION MANUAL Steering wheel remote control terminal Microphone terminal of BT phone (Connects the optional microphone RCB-199.
English B-2 B-3 B-5 B-4 B-1 B-6 INSTALLATION MANUAL 1 B-7 B-8 A-7 A-8 A-6 ∗1 A-5 A-4 No.
English ●Connecting the parking brake cord Connect the cord to parking brake lamp ground in the meter panel. INSTALLATION MANUAL Note: • Connecting the parking brake cord to lamp ground allows you to watch video images when the parking brake is engaged. • When the parking brake cord is not connected, the monitor will not display video images.
English 9.
Dichiarazione di conformità: Io mandatario nell' UE: Clarion Europa GmbH Hessenring 19-21, 64546 MörfeldenWalldorf, Germania Dichiaro che il prodotto VX709E è conforme al DM 28-08-1995 ottemperando alle prescrizioni dei DM 25-06-1985 e DM 27-08-1987.
Clarion Co., Ltd. 2009/6 All Rights Reserved. Copyright © 2009: Clarion Co., Ltd.
