Amplifiers
Amplifiers 2010 Amplifier Line Overview With a heritage of power, performance, and quality that spans many decades, Clarion proudly introduces our most sophisticated amplifier line ever. The entire line offers the kind of power and performance that today’s customers demand. Clarion does not ignore the need for an amplifier to look cool, but we put sound quality and performance at the top of our list. We will not for go musical transparency and control for size or a cosmetic feature.
Amplifiers You might be asking yourself: Why not individual gain controls? While individual gain controls can offer very accurate sensitivity settings, an installer MUST use an oscilloscope or voltmeter to properly set these controls for accurate channel to channel output. At the very least, the installer could tune the system by ear, but this will require many trips from the listening position back to the amplifier.
Amplifiers Forced Induction Cooling High Impedance Inputs Clarion’s XH-series amplifiers feature forced induction cooling. This is a two-part technology. First, the heatsink design of the amplifier maximizes air flow across the switching devices to hit them with a blast of cool air. Air is then ingested into the core of the amplifier and expelled through the ends of the amp. The second part of Forced Induction Cooling is the computer controlled cooling fan.
Amplifiers CEA-2006 Compliant Precise Frequency Crossover Chart The Consumer Electronics Association developed the CEA-2006 standard to provide a level playing field in which amplifier power and S/N Ratio specifications can be compared equally. All Clarion power amplifier specifications adhere to the guidelines of the CEA2006 specification. Please use the following charts to set the crossover frequency on the XH5210, XH510, and XH7110 amplifiers.
Amplifiers XH-Series Amplifier On-Board Diagnostics The XH7110, XH5210, and XH5410 amplifiers feature a computer controlled on-board diagnostics. This chart below outlines the error messages and the causes of the messages.
Amplifers XH7110 XH5210 Mono Amplifier, 850 Watts Maximum 2/1 Channel Amplifier, 340 Watts Maximum Hybrid Class GH Power Supply AB Audio Path IVS (Input Voltage Selector) Gain Control PFS (Precise Frequency Selector) Electronic Low Pass Filter (30Hz - 250Hz) Adjustable Subsonic Filter Variable Bass Boost Control (0 -15dB, 30 - 125Hz) Strappable Complimentary Sanken Triple Darlington Output Transistors MOSFET Power Supply Devices Speaker Level Inputs Double Sided FR4PC Board On-
Amplifiers XH5410 4/3/2 Channel Amplifier, 680 Watts Maximum Class AB Audio Path (Input Voltage Selector) Gain Control PFS (Precise Frequency Selector) Electronic High/Low Pass Filter (50Hz - 5.
Amplifers XR2110 XR2210 Mono Amplifier, 400 Watts Maximum 2/1 Channel Amplifier, 200 Watts Maximum Class AB Audio Path Low Pass Filter (30Hz to 300Hz) Selectable Bass Boost (0dB, 6dB, 12dB) MOSFET Power Supply Devices Speaker Level Inputs Double Sided FR4PC Board Gold Plated RCA, Speaker, and Power Connections Class Adjustable Adjustable Specifications Number of Channels Frequency Response (+/- 1.
Amplifiers XR2410 4/3/2 Channel Amplifier, 400 Watts Maximum Class AB Audio Path High/Low Pass Filter (30Hz - 300Hz) Selectable Bass Boost (0dB, 6dB, 12dB) Bridgeable and Mixed Mode Operation MOSFET Power Supply Devices Speaker Level Inputs Double Sided FR4PC Board Gold-Plated RCA, Speaker, and Power Connections Adjustable Specifications Number of Channels Frequency Response (+/- 1.
Amplifers EQS746 MCD360 1/2-DIN Graphic Equalizer with Crossover 3-Way Electronic Crossover 7-Band Graphic Equalizer Panel Selectable Main/Auxiliary Inputs Front/Rear Outputs with Fader and Subwoofer Output with Subwoofer Level Control Selectable Subwoofer Low-Pass Frequency at 60 or 90Hz 6-Channel/7 Volt RCA Line Level Output Auxiliary Input Sensitivity Blue Illumination 18dB/Octave Front Front, Specifications Power Source Frequency Response Signal to Noise Ratio Output Voltage
