Product Manual

12
QC Lockout
Select QC Lockout and press ENTER to cycle the options Off or On.
Off disables the QC lockout function. The QC symbol and Setup Options are not
displayed.
On enables the QC lockout function. The QC symbol is displayed. QC Lockout
timing can be set for Every 8 Hours, Daily, Weekly or Monthly.
Time
Select Time and press ENTER to set the QC test for Every 8 Hours, Daily, Weekly or
Monthly.
Time Setup
Select Time Setup and press ENTER.
Every 8 Hours / Daily Weekly / Monthly
The first highlighted digit will be changed. Press ▲ or ▼ to change. Continue to press
▲ or ▼ until the correct number is shown. Press ◄ or ► to progress to the next digit to
be changed. Press ▲ or ▼ to increase or decrease the number. Change each of the
time and date digits/fields in this manner until the desired date is shown. Press ENTER