Product Manual

Using the keypad or barcode reader to enter the Barcode ID, press ENTER to confirm

the ID entered and enter the next number.

Press CLEAR to clear the entered ID. Press PRINT to print the list of IDs. CANCEL to

exit to the previous screen.

Press START to save the IDs and return to the previous screen.

Up to 100 barcodes can be read. The screen will indicate how many barcodes have

been read.

Note: Do not change Barcode reader or Test number settings before all

barcodes have been processed. Otherwise remaining barcodes

may be deleted.

Press START to begin strip testing. The testing screen will be displayed as shown

below. This screen example shows a total of 10 strips to be run. It asks for the first strip

to be placed on the Strip Holder.

Note: In order to avoid contamination of the strip holder and/or the optical

sensor, make sure that the strip holder is fully extended and at a

standstill before placing or removing a urine strip from the strip

holder.

The next screen shows the barcode of the sample to be run and the next sample ID to

be run. This reduces the possibility of error and mismatch between the barcode and the

sample to be run.