User's Manual

AL11USERGUIDE–Draft Rev2
11|Page

1.UnplugACcordandlocateDIPswitchesonthebackoftheAL11baseun it .Liftrubbercovertoaccess
theswitch.
2.OpenthebatterycompartmentofthedoorbelltoaccessDIPswitches.
3.Changetheswitchpositionofeachswitchonbothunitsusingaballpointpen
toslidetheswitchesto
differentsettings.Allsettingsneedtobeidenticalforthesystemtowork.
4.Unplugandchangetheswitchsettingsoneachofyourotheraccessories(RemoteReceiver,Door
Announcer,etc.)tomatchthenewchannelsettingoftheAL11baseunitand doorbell.
5.Replacecoversand returnaccessoriesto theirproperplace.
