User's Manual
6
2. Plug the AC Adapter directly into outlet.
3. Do not plug other appliances into the same outlet or have outlet controlled by a wall
switch.
4. Choose a location that is out of the way of normal activities.
! CAUTION: USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 400mA.
Always connect the AC Adapter to the phone before you connect it to the AC power.
When you finish, disconnect the AC power before you disconnect it from the phone.
Installation
CONNECTING YOUR TELEPHONE
Carefully remove your cordless telephone from its box. If there is any visible damage, do
not attempt to operate this equipment. Return it to the place of purchase. Check to be
sure that you have all items that come with your telephone. You should have a
HANDSET, BASE UNIT, BATTERY, AC ADAPTER, TELEPHONE LINE CORD,
BELT CLIP and OWNERS MANUAL.
If at any time you have questions about your telephone please contact our Customer
Service Department at: 1-800-552-3368 or 423-622-7793.
TABLE/DESK TOP INSTALLATION
CAUTION: Disconnect the telephone line cord before connecting or disconnecting the
battery backup in the wall mount bracket.
1. Plug one end of the supplied modular telephone line cord into the jack marked
TEL located on the back of the telephone base as shown in the diagram.
2. Plug the modular telephone line cord’s other end into a modular phone jack.
3. Insert the supplied AC Adapter’s plug into the jack marked 9V DC 400mA located on
the back of the telephone base.
4. Plug the adapter into a standard 120V AC power (electrical) outlet.
5. Align the mounting bracket on the back of the base so that the black rubber feet are
towards the bottom of the phone. Insert the bracket’s tabs into the slots and secure the
bracket by sliding it upward.
6. Lift the base’s antenna to a vertical position.
7. Set the TONE/PULSE switch located on the back of the base to correct dialing
mode. Please check with your local Phone Company if uncertain of the type of
service.
8. Place handset in the cradle to begin initial charging.
WALL MOUNTING INSTALLATION
CAUTION: Disconnect the telephone line cord before connecting or disconnecting the
battery backup in the wall mount bracket.