User Guide C4230HS Handset TM E N G L I S H BOOST S C4230H MENU TALK 1 4I RD/P 3 2 DEF ABC 5L 8 TUV PQ * 6 MNO JK GH 7RS CL/FL E S P A Ñ O L 0 9 WXYZ # F R A N Ç A I S
CONTENTS Safety Instructions .......................................................................... 4 Parts Checklist .................................................................................. 7 Operating Instructions .................................................................. 8 Troubleshooting ............................................................................. 10 Technical Specifications .................................................................12 Regulatory Compliance ..
SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Do not use this telephone near a bath tub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool or anywhere else there is water. 4.
SAFETY INSTRUCTIONS instructions. Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation. E. If the telephone has been dropped or the case has been damaged. F. If the telephone exhibits a distinct change in performance. required before your hearing could be affected. If you experience hearing discomfort, you should stop using the handset. To protect your hearing, some hearing experts suggest that you: 1.
SAFETY INSTRUCTIONS 4. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conduction material may overheat and cause burns. 5. Charge the battery (ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. 6. Observe proper polarity orientation between the battery pack and the battery charger.
CONTENTS & PARTS CHECKLIST 1. Charger Base 1. 2. 3. 4. 5. 6. 7. Charger Base Handset Battery pack Battery compartment cover Belt clip AC adapter User Guide BOOST TALK ME NU CL/FL RD/P 1 2 3 DEF ABC 4 5 GHI 6 JKL MNO 7 8 PQRS TUV * 0 9 WXYZ 3. Battery pack # TONE CONTROL TONE 2. Handset 4. Battery compartment cover INTERCOM 5. Belt clip 6. AC adapter 7.
Operating Instructions C4230HS HOW TO CONNECT THE C4230HS CHARGING BASE Charge LED – LED will light up when handset is in base charging. Connect the AC adapter to the back of the charging base and a 120V wall outlet as shown above. 120V outlet HEAD SET AC adapter STOP Handset battery must charge 12 hours before use. TONE INTERCOM Battery • Insert battery pack such that (+) and (-) on battery touch spring in battery compartment. • Place handset on base to charge.
C4230HS Operating Instructions HOW TO DIAL OR RECEIVE A CALL 1. Complete connection instructions as shown in this guide. 1 BOOST 2. Install and charge battery as shown on page 8. 2 3 3. Make sure the power LED is on at bottom of base. M EN U CL/FL RD/P 1 2 3 ABC 4 5. When placing a call press TALK and then dial the number. 7 O 8 TUV 1 Volume Control The dial controls the volume level of the handset, headset or neckloop. HEA 6 MN JKL PQRS * DEF 5 GHI 6.
TROUBLESHOOTING The unit will not operate/no dial tone: • Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone. • Verify the telephone line cord is securely plugged into the wall jack and the telephone. • Make sure the battery has been placed in the battery compartment correctly. (The circular metal contacts on battery need to touch the metal springs inside battery compartment.) • Make sure the handset battery is fully charged.
TROUBLESHOOTING Phone Will Not Hold Charge: • Make sure the charging contacts on the handset and base are free of dust and dirt. While unplugged, clean the contacts with a soft cloth. • Make sure CHARGE LED on the base is lit when the handset is in the cradle. • Handset battery may have developed a memory, due to user improperly charging, and may need to be replaced. (Battery must be charged a full 12 hours before the first use.
TECHNICAL SPECIFICATIONS General Model Number: Frequency: Amplification: Compatibility: C4230HS 5.8 GHz 50 dB C4230 and C4220 Handset Unit Product in Inches: Weight in Pounds: (L x W x H): 7.25 x 2 x 1.25 0.5 lb Base Product in Inches: Weight in Pounds: Power Supply: (L x W x H): 3.50 x 2.75 x 2 .50 lb AC Adaptor (Input: 120V AC, 60 Hz; Output: 9V DC, 500mA) Handset and Base Product in Inches (L x W x H): 8 x 3.25x3.25 Weight in Pounds: 1.10 lbs Battery Information Battery Type: Ni-MH AAA 800 mAh 3.
REGULATORY COMPLIANCE Part 68 of FCC Rules Information a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
REGULATORY COMPLIANCE of this telephone equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. j) This telephone equipment is hearing aid compatible. Customer-Owned Coin/Credit Card Phones: To comply with state tariffs, the telephone company must be given notification prior to connection.
REGULATORY COMPLIANCE Industry Canada Technical Specifications This product meets the applicable Industry Canada technical specifications. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection.