C510 Owners Manual E N G L I S H E S P A Ñ O L Clarity® 510 Corded Telephone with Caller ID Featuring Clarity® PowerTM Technology F R A N Ç A I S
Table Of Contents Safety Instructions.....................................................................................................................3 Getting Started...........................................................................................................................6 Clarity 510 Features.......................................................................................................................6 Connecting Your Telephone ................................................
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: 11. Read and understand all instructions. 12. Follow all warnings and instruc-tions marked on the telephone. 13. Do not use this telephone near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool or any where else there is water. 14.
Important Safety Instructions liquid of any kind on the telephone. 13. To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 15. Never install telephone wiring during a lightning storm. 14. Unplug this product from the wall outlet and refer servicing to the manufacturer under the following conditions: 16.
Important Safety Instructions The following items are included as part of the CS-03 Requirements.The standard connecting arrangement code for the equipment is CA11A.This product meets the applicable Industry Canada technical specifications. NOTICE:The Canadian Department of Communications label identifies certified equipment.This certification means that the equipment meets certain telecommunications network protective operational and safety requirements.
Getting Started 21 CLARITY 510 FEATURES AND CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Getting Started 1. 2. 3. 4.
Getting Started CONNECTING YOUR TELEPHONE 1. Carefully remove your telephone from its box. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2. Check to be sure that you have all items that come with your Clarity 510 telephone.You should have a HANDSET, BASE UNIT, AC ADAPTER, MOUNTING BRACKET, HANDSET LINE CORD (COILED), TELEPHONE LINE CORD (FLAT) and a OWNERS MANUAL.
Getting Started DESK MOUNT INSTRUCTIONS Follow these instructions to place the phone on a desk or table top using the supplied bracket. 1. Plug one end of the long flat telephone line cord into the jack marked TEL LINE located on the back of the telephone. Route the cord through the narrow groove and plug the other end into the telephone wall jack. 2. Insert the plug of the AC adapter into the jack marked 12 VDC located on the back of the base unit.
Getting Started WALL MOUNTING INSTRUCTIONS The phone unit may be mounted on a standard wall plate. The mounting bracket will mount on the telephone with the wide end of the bracket towards the bottom of the phone. 1. Plug one end of the flat telephone line cord into the jack marked TEL LINE located on the back of the telephone. 2. Insert the plug of the AC adapter into the jack marked 12 VDC located on the back of the base unit. 3.
Getting Started SETUP MENU Setup Menu Operations The Clarity 510 automatically enters the Setup mode when powered up or if the MODE key is pressed for more than three (3) seconds.To exit the Setup Menu press MODE. Pressing the ENTER or MODE button will exit the Setup Menu at any point during this process. Press the UP or DOWN arrows to move between option screens. It is necessary to press the UP or DOWN arrow to move to the next screen and save the information stored.
Getting Started VOICE MAIL NUMBER ENTER AREA CODE 1 and 2 Allows you to store an access number for quick message retrieval. Enter the digits of the access number. Press the DOWN ARROW to save information and move to the next menu selection. Allows you to enter up to two (2) area codes that can be used to amend numbers stored in the Caller ID Memory allowing the number to be dialed from the memory. In the Setup Menu the left most dash will flash. Enter 3 digit code.
Operating Your Telephone FEATURES With the Clarity Power feature the high frequency sounds are amplified more than the low frequency sounds so that words are not just louder, but clearer and easier to understand. BOOST button will reset automatically every time the phone is hung up for at least 5 seconds (if Boost switch is in OFF position – see BOOST ON/OFF switch description below).This is done to protect users of the phone who may not need the powerful amplification of the Clarity 510.
Operating Your Telephone Boost function will be by default ON – every time a call starts, the Boost function is active.The Boost function will default to ON every time the phone hangs up, regardless of the previous state of the button.When the switch is in OFF position, the Boost function is by default OFF every time a call starts, the button will not illuminate, and the Boost function will reset to OFF every time the phone hangs up.
Operating Your Telephone Visual Ringer With the DC power source attached, the backlit keypad will flash to alert of an incoming call.This feature can be enabled/disabled in the Setup Menu (see page 12). Large Multi Function LCD An adjustable LCD shows the number you are dialing, displays numbers stored into the PhoneBook and, with Caller ID service displays information about the caller before you answer. Backlit Keypad The keypad is backlit.
Operating Your Telephone Flash Flash is a feature that enables you to answer a call if you have call waiting. Please contact your local telephone company for information on subscribing to this feature. Pressing the FLASH button while you are having a phone conversation will pick up the second conversation and place the first call on hold. Press the FLASH button again to continue your conversation with the first caller.
Operating Your Telephone CALLER ID (CID) AND PHONEBOOK OPERATIONS: MODE button for 3 seconds will cause the phone to enter the Setup Menu.This button also serves as a New Call indicator. There are six buttons that control the CID and PhoneBook operations. Scroll Up/Down: ( ) Allows for a scrolling review either up or down through the CID lists or the PhoneBook.The list will wrap around when at the beginning or the end of the list. Enter/Dial: (ENTER BUTTON) Works in CID and PhoneBook mode.
Operating Your Telephone Option Function: OPERATIONS OF CALLER ID This is a software function that lets the user to add a pre-programmed area code and/or long distance code onto a seven (7) or ten (10) digit CID number if necessary to dial. If a local area code (codes) and long distance code are programmed into memory, then when the user presses ENTER/DIAL while reviewing a CID number, the phone will show the codes available to add, thus allowing the call to be dialed from memory.
Operating Your Telephone Viewing Caller Information During Incoming Calls Caller ID Screen Icons E N G L I S H there is at least one (1) new call to review. In addition, the MODE button will flash indicating a new call. The REPEAT call icon will light if the Clarity 510 receives more than one call from the same number. The FORWARD icon will light when the Clarity 510 receives a call forwarded from another number.
Operating Your Telephone The HANDSET icon will appear on the LCD to indicate phone is off hook. Using the Option Function This feature allows you to add a long distance access code and/or area code to numbers or delete an area code from a number stored in the Caller ID Memory, thus allowing you to dial directly from the Caller ID Memory. For example: A number appears in the Caller ID Memory as a ten (10) digit number and it is necessary to dial one (1) plus area code and phone number to place the call.
Operating Your Telephone Editing Entry from Caller ID to Phone Book Entries can only be edited while in Caller ID mode. Once the entry has been transferred to the PhoneBook, the entry will need to be deleted and resaved. To edit and save: 1. Press PROG. The screen will display SAVE PHONE BOOK, USE ENTER TO END.The cursor will be active and the name and number can be edited. 2. Press ENTER.
Operating Your Telephone To Retrieve Messages: Pick up the handset and press the flashing ENTER key.The number will automatically dial the previously entered Voice Mail access number.The blue LED will be automatically turned off once messages have been accessed. The message waiting notification can be disabled in the Setup Menu (see page 11).The user can still use the service from the phone company, however the indicator will not flash and the screen will not display MESSSAGE WAITING.
Operating Your Telephone Using the Dial Pad to Enter Letters When prompted to enter a name select the appropriate letter using the digits on the dial pad. Pressing the key once will cause the first letter to appear; (for instance, for entering “E” you would press “3” twice).The cursor will advance to the next space to allow you to enter the next letter. Saving to Phonebook Phone numbers of up to 23 digits and names of up to 16 letters can be stored into PhoneBook. 1.
Operating Your Telephone To dial from the Emergency Memory button follow one of the two sequences: 1. Press desired memory button, the number will be displayed on the screen. Lift handset to dial. 2. Lift handset, press the desired memory button.The number will dial. Calling from the PhoneBook 1. Select the number you wish to dial from the PhoneBook. Lift the handset.The handset icon will appear on the LCD to indicate phone is off hook. 2. Press the ENTER button to call the number.
Operating Your Telephone E N G L I S H Hands Free Dialing The telephone can be dialed without lifting the handset or pressing the HEADSET button (if a headset is plugged in).This feature allows you to dial the phone number and correct mistakes with the DEL button rather than hanging up and redialing. 1. Dial the desired number. Lift the handset or press the headset button to transmit the call. 2.
Trouble Shooting No Dial Tone/Phone Will Not Operate •Check all phone cords and connections. Make sure they are plugged in securely. •Switch out handset or telephone line cords. •Disconnect any other equipment that may be attached to the phone. Unable To Dial Out •Make sure TONE/PULSE switch is set correctly. •Phone may be at the end of a long line of phones (loop). Phone may not be getting enough power from the phone line.
Trouble Shooting Static On Line Interference •Your phone may be located near a touch lamp, microwave, refrigerator or other household appliances.Try relocating your phone to another area. •Check cords and connections. Frayed or poorly connected cords can cause interference. Swap cords if necessary. •A cordless phone on your line may cause static.Try disconnecting the cordless phone.This may eliminate the problem.
Federal Communications Commissions Requirements FCC Part 68 Information This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.The FCC Part 68 Label is located on the BASE UNIT of the telephone.This label contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company. Connection to the network should be made using standard modular telephone jacks, USOC type RJ11C.
Federal Communications Commissions Requirements DO NOT DISASSEMBLE THIS EQUIPMENT. Part 15 of FCC Rules Interference Information It does not contain any user serviceable components. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Connection to party lines is subject to tariffs.
Federal Communications Commissions Requirements 1. Where it can be done safely, reorient the receiving television or radio antenna. 2. To the extent possible, relocate the television, radio or other receiver with respect to the telephone equipment. (This increases the separation between the telephone equipment and the receiver.) 3. Connect the telephone equipment into an outlet on a circuit different from that to which the television, radio, or other receiver is connected. 4.
WARRANTY & SERVICE The following warranty and service information applies only to products purchased and used in the U.S. and Canada. For warranty information in other countries, please contact your local retailer or distributor. Limited Warranty Clarity, A Division of Plantronics, Inc.
WARRANTY & SERVICE Other Legal Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state. How to Obtain Warranty Service To obtain warranty service, please prepay shipment and return the unit to the appropriate facility listed below.
