User Guide Cordless Telephone with Caller ID C600

Temporary Tone
If you have rotary (pulse) dial service, you can
change from pulse to touch tone (tone) during a
call.
1. Make phone call and wait until it
is connected.
2. Press the
*
key. Keys pressed after
this are sent as tone signals.
3. The phone will automatically reset
to rotary (pulse) service after the
call ends.
Lighted Key Pad
The key pad will light for fifteen (15) seconds
after removing the handset from the base.To
reactivate the feature while in standby, press the
TALK or the MEM button.To activate while
the phone is in use, press any key.
Page/Handset Locator
To send a page signal from the base to the hand-
set, press the
PAGE button located on the base
of the telephone.A series of rings will sound
from the handset.
To locate the handset if it is away from the base,
press and hold the
PAGE button for approxi-
mately five (5) seconds. A series
of rings will sound. Return the handset
to the base or press any button to cancel
the page.
Telephone Operations
E
N
G
L
I
S
H
17
Channel Operation
The C600 cordless telephone automatically
searches and selects the clearest of 40 chan-
nels when it is being used. If interference devel-
ops on the line, pressing this button
will move to another channel.
Security Code
The security code prevents your cordless
phone conversations from being accessed
by a phone on a different line. Once the hand-
set battery is fully charged, the handset will
automatically select the code from over 65,000
different combinations.The code is changed
every time the handset is placed in the cradle.
If you have trouble with placing or receiving
calls, a lost security code may be the cause of
the problem.When this occurs, the handset
can no longer communicate with the base.