User's Manual

AL10USERGUIDE‐Draft Rev2
14|Page

6.MOTIONSENSORLIGHT
Youmustpurch asetheoptionalMotionSen sor(ModelAM‐SX)fromClaritytousethisfunction.Whenasignalis
receivedfromtheMotionSensor, theindicatorlightilluminates,andthelampwillturnonforonesecond,off
foronesecond,onagainforonesecond,
offfortwoseconds,andrepeat.



B.MasterReset
IfyouhaveseveralAlertMastersystemcomponents(suchasthe AL10,theAL11orthe AL12),youcan
savetimebyusingtheAL10toresetallofthematonce(masterreset).Todo
this,pressthe
RESET / PAGE button .
C.NotificationPriority
If the AlertMaster system receives two notification signals at the same time, it will display the highest
prioritysignal.Forexample,ifitreceivesaMotionSensorsignalrightafteritreceivesaPhonesignal,the
indicatorwillchangefromPHONEtoSENSOR.Thepriorityforeachnotificationsignalisshown
asfollows:
1.MasterReset
2.AudioAlarm
3.BabySound
4.RoomSound
5.Phone
6.Door
7.Paging 
8.AlarmCl ock 
9.Random(Security)Timer