Datasheet

Getting Started 2 Installation
2.3 Hardware Installation
The following chapters describe the installation of a protective Hardware
key (dongle) and the brief installation of the most common integration
converters INT9, U-PAD2 and Colibrick.
Caution: Plug in the USB devices ( ROCKEY USB hard lock, Colibrick or U-
PAD2) only after the installation of the Clarity station.
A detailed description of the hardware and its installation, including
troubleshooting, is available in separate manuals.
2.3.1 Hardware key (dongle) installation
The hardware key needs to be installed and present in the PC when using
the Clarity Chromatography Station.
The drivers will automatically be installed during Clarity software
installation. If the installation did not proceed automatically, refer to the
chapter "Hardware Key" on pg 48.
Caution: Install Clarity first and only then insert the hardware key into the PC.
When you have the Sentinel hardware key, refer to the chapter "Sentinel
dongle installation" on pg 50.
Printer port hardware key (dongle)
Plug the hard lock in the printer port between the printer port and any
potential printer.
- 4 -