Datasheet
2 Installation Clarity
2.3.2 The INT9 Card
In Windows 8/7/Vista/XP the drivers will be installed automatically during
the installation of Clarity.
l Install the Clarity software first.
Caution: Installing Clarity before inserting any devices (INT9, Colibrick, U-PAD2,
etc.) is vital for the correct function of any A/D Converter!
l Turn off the PC.
l Insert the INT9 card into the PCI slot.
l Start up the PC. In Windows 8/7/Vista/XP the drivers were installed
automatically during the installation of Clarity.
l The driver is now installed, proceed to setup and wiring.
Note: When installing multiple INT9 cards, a PC restart is recommended after
the installation of each card, in order to prevent the reassignment of INT9
acquisition channels between Clarity Instruments.
2.3.3 Installation of the Colibrick Converter
Caution: Install the Clarity software before attaching the device to the USB slot. In
Windows 8/7/Vista/XP the drivers will be installed automatically during
the installation of Clarity.
l Install Clarity from DVD-ROM or get the latest version from
www.dataapex.com.
l Connect the Colibrick device with a cable to a USB port on the computer.
l After connecting the converter, Windows 8/7/Vista and XPwill detect it
automatically and the device will be ready in a moment.
Note: When installing multiple Colibricks it is recommended to restart the PC
after the installation to let the USB devices set in the order in which they
always will appear in the lists.
- 5 -