Datasheet

Getting Started 5 Tour through the Clarity station
5 Tour through the Clarity station
The following two sections will show you step by step,how to perform a
single analysis (the chapter "Running the Single Analysis" on pg 17.)
and a sequence measurement (the chapter "Running the Sequence
measurement" on pg 24.). They are shown as a succession of steps, all
of which should be performed in the given order. Some sections may be
skipped, as their output files have been included already as examples.
You will be informed about it in those sections. Also, the whole process
has Notes - the procedures described in them are optional and you do not
need to perform them in order to reach the goal.
The Clarity software is intuitive and easy to master without much training.
The first analysis can be run in less than one minute after installing the
station and configuring the hardware.
This tour assumes that the station is in its default configuration and that
nothing has been modified in the DEMO projects. It is possible to test the
Clarity functions on other projects, of course, but the files mentioned in
this guide will not be present.
Note: Although this is only a tour of the station aimed at Clarity beginners , it
assumes users have a basic knowledge specific to chromatography
principles and basic processes such as calibration.
- 16 -