Datasheet

Getting Started Table of Contents
Contents
1 Brief Description 1
1.1 Hardware and software requirements 1
2 Installation 2
2.1 Multilingual Clarity 2
2.2 Software Installation 2
2.2.1 Windows Vista installation 3
2.3 Hardware Installation 4
2.3.1 Hardware key (dongle) installation 4
2.3.2 The INT9 Card 5
2.3.3 Installation of the Colibrick Converter 5
2.4 Device setup and wiring 6
2.4.1 Standard cable for the Clarity station 6
2.4.2 Chromatograph 7
2.4.3 Autosampler 8
2.5 Clarity Configuration 9
3 Qualification procedures 11
3.1 Installation Qualification - IQ 11
3.2 Operational Qualification - OQ 12
3.3 Performance Qualification - PQ 13
4 Program structure and control 14
5 Tour through the Clarity station 16
5.1 Running the Single Analysis 17
5.1.1 Instrument window 17
5.1.2 Single Analysis dialog 18
5.1.3 Data Acquisition window 20
5.1.4 Chromatogram window 22
5.2 Running the Sequence measurement 24
5.2.1 Sequence window 24
5.2.2 Calibration window 27
5.2.3 Linking the calibration to a chromatogram 29
5.2.4 Linking the calibration to the method 30
6 Connecting Autosamplers 32
6.1 AS + GC set - Active Sequence 32
6.2 AS + LC set - Active Sequence 35
6.3 AS - Passive Sequence (GC or LC) 36
6.4 Auto Sampler - Active Sequence + AS Control + A/D card 37
6.5 AS - Active Sequence + AS Control + digital acquisition 38
7 Troubleshooting 39
7.1 Locate your problem: 40
7.2 Problems at station start 41
7.2.1 DEMO - missing HW Keylock 41
7.2.2 DEMO - Keylock test failed 42
7.2.3 DEMO - WRONG S/N 42
7.2.4 DEMO - Trial Expired 42
- i -