Datasheet

5 Tour through the Clarity station Clarity

5.2.2 Calibration window

Use the Calibration button in the Instrument window to open the

Calibration window.

Note: The following section describes how to make a calibration. If you wish to

skip this step, you can open (via the File - Open Calibration command) the

calibration file DEMO1.CAL instead and test the functions of the

Calibration window on it. In this case you can continue with the chapter

"Linking the calibration to a chromatogram" on pg 29.

Fig 16: Calibration window - empty

Use the New Calibration icon to create new calibration file.

Note: To save the calibration now, it would be necessary to change its name (no

calibration can be saved under the name NONAME.CAL) and fill in at

least the first compound name. Then the calibration can be saved using

the Save Calibration icon , File - Save or File - Save As... command.

Use the Calibration Options icon and change the Display Mode(top

right corner of the dialog) to ISTD, then press OK button.

l Now, the calibration standards have to be imported to the calibration. Use

the Open Standard icon (yellow) to open the STD 1.PRM data file.

The lower part of the Calibration window now displays the chromatogram

of the calibration standard.

- 27 -