Datasheet

5 Tour through the Clarity station Clarity
Mark all files with the names SAMPLE_VIAL_X-Y in the DATA directory to
be reprocessed, check the Reprocess by Instrument Method checkbox
and click the Proceed button. All selected chromatograms will now have
the calibration linked to it.
Note: The chromatograms to be batch processed have to be saved in the
current project directory.
l Open the Chromatogram window and load any file just reprocessed (e.g.
SAMPLE_VIAL_7-2.PRM) and look at the Result table. All peaks present
in the calibration are now identified and calibrated.
l Multiple chromatograms may be displayed at once. Switch to the Overlay
mode by pressing the Overlay button found on the Overlay toolbar (no.
in the 5.1.4 on pg 22.) and then use the File - Open command or the
Open Chromatogram icon. It is now possible to select several files to
be opened in the Open Chromatogram dialog.
- 31 -