Datasheet

Getting Started 6 Connecting Autosamplers
6.3 AS - Passive Sequence (GC or LC)
The autosampler used in the Clarity Passive Sequence (both GC and LC
sets) does not use the OUT
n
R digital output cable. All timings are
controlled by the chromatograph; Clarity only performs one analysis for
each start signal received. All synchronization only includes external start
up of data acquisition in Clarity using the IN
n
starting cable.
Fig 22: Wiring of an autosampler in Passive Sequence
A Passive Sequence has to be used e.g. in the sets with Headspace
autosamplers (without AS Control module).
Caution: It is not recommended to use the Passive Sequence together with the
Control modules.
Note: Detailed information on using Passive Sequence can be found in the
Clarity User Guide.
- 36 -