Datasheet

7 Troubleshooting Clarity
7.4 Hardware Key
7.4.1 Rockey USB dongle (re)installation
Fig 33: Rockey USB dongle
l Install Clarity software.
Caution: Be sure to have suitable drivers at hand before inserting the USB token
into the PC slot for the first time!
l Connect the USB dongle to a USB port on the computer.
l Use the INSTDRV.EXE file from C:\CLARITY\HW_ DRIVERS\ROCKEY\
folder to (re)install the Rockey drivers.
l If this did not help,try the following:
l After connecting the token, Windows will recognize the new Plug and
Play device and will attempt to install a driver. The Found New Hardware
Wizard will appear:
l Select: "Search for a suitable driver for my device."
l Select: "Specify a location" and then select the path to the CD drive from
which you have installed the Clarity program, then the HW_
DRIVERS\ROCKEY subdirectory. If you have installed the workstation
before connecting the device, you will also find an identical subdirectory
in the main directory of the workstation. The driver is in a file named
ROCKEY4USB.SYS and its information file is ROCKEY4USB.INF.
l The rest of the installation will be carried out automatically. In the Start
menu on the lower left corner of the screen select, find Settings - Control
Panel. Then, after clicking on the System icon, verify that the Device
Manager tab has the item "Universal Serial Bus Controllers" - "Feitian
Rockey4 USB" installed correctly .
- 48 -