Datasheet

Getting Started 1 Brief Description
1 Brief Description
Clarity chromatography station is an effective tool for the acquisition,
processing and evaluation of data from any gas or liquid chromatograph
with analog output and from selected chromatographs with digital output.
In the maximum configuration, it is possible to measure on up to four
chromatographs simultaneously, from which, each may be equipped with
up to 16 detectors.
The station is equipped with support tools for automatic cooperation with
chromatographs and autosamplers.
Clarity meets the requirements of FDA’s directive 21 CFR Part 11.
The Clarity station automatically processes all data acquired using CSW
stations (previous DataApex chromatography stations).
1.1 Hardware and software requirements
Hardware and Software Compatibility:
Information about hardware and software compatibility can be found in
datasheet D016 Clarity Chromatography Station - Compatibility Table
or on the Internet page http://www.dataapex.com/products/clarity-std-
compatibility.php.
Verify that you have:
l In case of analog acquisition (using A/D converter), a free slot (or port) for
your converter:
INT7, INT9, CB20 - PCI slot
U-PAD, U-PAD2, Colibrick - USB port
Net-PAD - LAN connection
Note: A full size PCI 2.0 32 bit slot is required. Low profile or PCI Express slots
cannot be used.
l In case of controlled instrument, free suitable communication port as
described in the manual for the control module.
l A free USB slot or parallel ( PRINTER ) port for the hardware key
(depending on the type).
l A DVD-ROM drive when installed from DVD-ROM.
Note: When using discontinued hardware (e.g. INT5 or CB11), consult the
separate manual for requirements and compatibility issues.
- 1 -