User guide

Clarity - Getting Started First “Analysis”
36
Fig. 15. Data Acquisition window
The measured chromatogram can be compared
to an already completed chromatogram, e.g.
solvent, calibration standard, etc. Two types of
chromatograms can be displayed in the
background:
• Simply by using the File – Set Background
Chromatogram command select which
chromatogram is to be displayed in the
background.
• Or, if you defined an automatic subtracted
chromatogram in the
Method Setup - Advanced
dialog, using the File - Show Subtraction
Chromatogram command will display the
chromatogram chosen for subtraction.
Note: Any chromatograms in the background are
displayed only during data acquisition.
5.4.5 Analysis stop
The analysis can be stopped either by using
the
Stop command in the Single Analysis
dialog or automatically after the passing of the
Run Time set next to the Enable Autostop
checkbox in the
Method Setup – Measurement
dialog.
At this moment the measured data are
integrated, evaluated and saved.