User manual

Clarity - INT9 A/D converter Installation
10
6. Enter the detector names in Name fields for
individual channels, set signal units.
Note: A detailed description of this dialog can be found in
chapter 3.1 on pg. 14.
7. Press the OK button.
The DataApex INT9 A/D Card will appear in
the Setup Control Modules list  of the
System Configuration dialog.
8. Drag and drop the DataApex INT9 A/D Card
icon from the Setup Control Modules list 
on the left side of the System Configuration dialog
to the desired Instrument  tab on the right
side  (or use the button  to do so).
Fig. 4. System Configuration
9. Set the Start input and Ready output
numbers  for your acquisition card according
to the wires being used for synchronization.
Note: The configuration dialog of the INT9 card (INT9 A/D
Card Setup) can be displayed any time by double-
clicking on its icon or using the Setup button.