Vocally 3 In-line, Voice Activated Telephone Dialer User Manual Freedom Rev 1.02 To contact us: For support e-mail us at customerserv@activocal.com Fax us at +972-8-6996910 Visit us on the web at www.activocal.com DDV-241-000 REV.
A word from us...........................................................................................................3 About this manual......................................................................................................3 Chapter One ...............................................................................................................4 Installing Vocally......................................................................................................
A word from us Vocally III is the new successor in the Vocally line of products. Years of experience, market feedback, and use of the latest voice-recognition technology have enabled us to build the most advanced voice-recognition phone dialer in the world. We appreciate your trusting us by purchasing this product, and we wish you a long and enjoyable experience with it. Voice recognition is breaking new ground every day and is being used in more and more everyday appliances and devices.
Chapter One This chapter describes how to install Vocally, add names, erase a name or all names, listen to stored names, and, most importantly, dial a name using only your voice! Installing Vocally To use Vocally, install it by following these three steps: A. Connect the supplied power adaptor to the AC wall outlet and to the Vocally jack marked ‘Power’.
D. When asked, say the name to be added. Speak clearly but as normally as possible. When prompted to repeat the name, do so. If the training of the name has been successful, Vocally will ask you for the corresponding phone number. If the training has failed, Vocally will issue a sound that means a general error has occurred, or Vocally will state the specific problem that has occurred. E. When prompted, enter the number using your phone's keypad. You can enter up to 45 digits.
1. You can disconnect Vocally from AC power whenever needed, without concern. The names and numbers will not be lost, and your phone will continue to operate normally. The same applies for a power outage. 2. If you are using a cordless phone, please verify that the sound on the line is ‘clean’ with no ‘white’ noises. These ‘white’ noises, usually occur when the mobile part of the cordless phone is far from its base. Such noises can make it difficult for Vocally to recognize names. 3.
Erasing a single name Erasing a single name from memory can be accomplished in two different ways, as described below: Method 1: A. Pick up the handset. Vocally asks for a name to call. Press the pound (#) key. The main menu will be played. B. Press the ‘2’ key. Vocally asks for a name to erase. Say the name you wish to erase. C. If the name is found, Vocally asks you to confirm the erasure of the name by pressing the ‘5’ key.
Erasing all names Warning: Erasing all names is an irreversible operation. Use it with care! A. Pick up the handset. Vocally asks you for a name to call. Press the pound key (#). The main menu will be played. B. Press the ‘3’ key. Vocally will prompt you with a warning message. C. Press the ‘9’ key to confirm the erasure. Any other action (for example, hanging up) will cause the names not to be erased. D. Press the '9' button.
Chapter Two This chapter describes how to dial a number during a call, work with a speakerphone, enable Vocally to work when connected to a Private Branch eXchange (PBX), and change the spoken language. Working with a Speakerphone Vocally can be connected and used with a speakerphone.
B. Program only the first memory location with a single pound key (#). Now connect the RC200 to Vocally, as described in Chapter 1 of this manual for any other telephone. Please note that, if you wish to add names, you will be required to use the RC200 keypad. To place a call, give the remote control a short press and wait for Vocally to ask you for a name to call. To end the call, press the remote control again.
Chapter Three This chapter answers Frequently Asked Questions and provides technical details, important notices, and warranty information. Frequently Asked Questions The following is a list of the most common questions and problems encountered when using Vocally. If you cannot find a solution to your problem here, please do contact us. Question: I have connected the unit as described in this manual; but, when I pick up the handset, I hear nothing.
To listen to a playback of the name, use key ‘4’ while in the main menu. (Please refer to Chapter One of this manual for exact instructions.) Question: Vocally now speaks in a language I do not understand. How can I change it back to my desired language? Answer: Pick up the handset. Press the pound key (#) to reach the main menu. When you do, press the ‘0’ key to reach the language menu. Listen to the different language options. When your desired language is heard, press its index number.
Technical Specifications for Vocally Data Value Operating voltage DC Jack type Maximum power consumption Phone/ Line jack type Dialing Method Maximum number of names to be stored Type of memory device Max number of digits per name Max name record/playback length Minimum Data retention time Weight (No power supply or cables) Physical Dimensions 12 Volts DC, regulated. 2.1 mm, polarity un-important 850milliwatts RJ11 DTMF (Dual Tone Multiple Frequency) 60 Flash 45 3 Seconds 15 Years 120 Grams (0.
This warranty does not cover (a) products which have been subjected to misuse, accident, physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire or operation outside their published maximum ratings; or (b) products which have been repaired, altered, or modified by anyone other than an authorized representative of ActiVocal; or (c) damages caused by failed components, parts or accessories not sold by ActiVocal or not compatible with the warranted product; or (d) p
Customer Information 1. 2. 3. 4. 5. 6. This equipment, the Voice Activated Phone Dialer, model “Vocally 3”, complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the rear panel of this equipment is a label, that contains among other information, a product identifier in the format US:63DOT00BVOCALLY3. If requested, this number must be provided to the telephone company.