Telephone User Manual

4
Installation
A. Desk Mounting
1. Plug in the long phone
cord.
2. Plug the handset cord
into the telephone.
3. Insert the AC Adapter
cord into the receptacle
on the back of the
JV-35. Then plug the
AC Adapter into an
electrical outlet.
4. Lift the handset and
listen for a dial tone
5. Your JV-35 is ready to
use.
B. Wall Mounting
1. Pull the handset hook
out and reverse its
position so that the
hook points up.
2. Install the Base Plate by
sliding the small tabs
into the upper slots.
Push on the bottom of
the Base Plate until it
snaps into place.
Fig.3 - Connections and
installation
Fig. 4- Repositioning the hook
Fig. 5 - Phone base installation
for wall mounting