Telephone User Manual

E
N
G
L
I
S
H
13
Operating your JV-35
beep” sound. This
confirms the JV-35 is
ready to be programmed.
3. Press the desired
Emergency button.
After the “beep,” speak
into the handset to
record an announcement
like “Police” or “Fire”
for that button. Your
recording can be up to
three seconds long.
4. After three seconds
there will be a “beep”
to tell you recording
has stopped. Your
recording will be
played back
immediately so you can
check it, followed by a
“beep-beep” sound.
5. Now you can repeat
steps 3 and 4 if you
want to change your
announcement or if you
want to record an
announcement for a
different Emergency
button.
6. Otherwise, when you
are finished recording,
hang up the handset.
7. Slide the
ANNOUNCEMENT
switch to the CUSTOM
Fig. 22 - Announcement Switch
Fig. 23 - Emergency Button