Telephone User Manual

16
Operating your JV-35
number buttons. If you
choose, you can record
announcements for the
number buttons in your own
voice by following these
steps.
1.Pick up the handset.
2.Slide the
ANNOUNCEMENT
switch to the PROG
position. You will hear
“Program Mode,
Program Mode”
followed by a “beep-
beep” sound to confirm
the JV-35 is ready to be
programmed.
3. Press the
1 button.
After the “beep,” say
“One” in your own
voice or language.
Your recording can be up to
one second long.
4. After one second there
will be a “beep” to tell
you recording has
stopped. Your
recording will be
played back
immediately so you can
check it. Then there
will be a “beep-beep”
sound.
5. Now you can repeat
steps 3 and 4 for all
Fig. 28 - Announcement Switch
Fig. 29 - Keypad Programming