Instructions / Assembly
103
SPECIALTY CLIPS AND CONNECTORS
CLIPS AND CONNECTORS
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
Aluminum Burn Clip
ClarkDietrich aluminum burn clips
are used as part of the H-stud area
separation wall assembly and are
designed to melt when exposed
to fire. The clips hold the area
separation wall assembly in place
at the floor, roof and truss line
between adjacent units. In a fire,
the aluminum burn clips on the
fire-ridden side of the wall will melt,
allowing the wall structure for that
side to collapse.
Product
code
Thickness
(in)
Size
(in)
Packaging
Pcs./Bucket
AB
0.050 2 x 2 x 2-1/2 500
AB63* 0.063 2 x 2 x 2-1/2 500
*AB63 meets requirements of ICC-ES Legacy Report 92-19.
rESiliEnT SOunD iSOlATiOn Clip
The RSIC-1
®
resilient sound isolation
clip is used in conjunction with
drywall furring channel to fasten
gypsum wallboard to various wall and
floor-ceiling designs and applications,
while simultaneously providing
acoustical separation (decoupling).
This significantly reduces the amount
of impact and sound that filters from
surrounding rooms—reducing the
noise transfer by 75 to 100%.
Product code Pcs./Bucket
RSIC-1 200
U.S. Patent No. 6,267,347 of MTEC, LLC.
The RSIC-1 clip is a registered trademark of MTEC, LLC.
Ul and UL Classified are registered trademarks of
Underwriters Laboratories, Inc.
mETAl FurrinG CHAnnEl Clip
ClarkDietrich metal furring channel
clips are made of galvanized wire
and used to attach metal furring
channels to 1-1/2" U-channels in
ceiling gridwork. Clips must be
installed on alternating sides of the
1-1/2" channels. Use tie wire when
clips cannot be alternated. Clips
should only be used when single-
layer gypsum or single-layer veneer
plaster base is used.
Product code Pcs./Bucket
MFCC
500