Installation Guide

ProSTUD

Drywall Framing System (ProSTUD

and ProTRAK

) is the innovative steel drywall stud that

sets a new industry benchmark for high performance. Its patented design combines high-strength steel with

additional stiening enhancements for a drywall framing stud previously unimagined. What’s more, ProSTUD

Drywall Framing is backed by comprehensive laboratory testing for strength, ﬁre and sound. No other drywall

framing system has been as thoroughly tested as ProSTUD. So not only is it a dream to work with, but it also

has the performance to meet the requirements of today’s building codes. ProSTUD is available nationwide.

HOW TO INSTALL

ProSTUD

DRYWALL

STEEL FRAMING

SAFETY TIPS & HELPFUL HINTS

• Wear safety goggles. Metal particles that are produced from cutting and fastening

framing can harm your eyes.

• Wear work gloves. Metal studs and track can be sharp, especially after cutting.

• Cross-bracing of studs with additional notched u-channel track perpendicular to

studs is recommended on walls where heavy shelving, cabinets or other wall mounted

ﬁxtures are anticipated.

• If attaching trim with adhesive, you may need to hold trim in place with temporary

screws while adhesive sets. If attaching trim with screws, nails or staples, consider

putting wood 2" x 4" inside the runners prior to attaching drywall.

LIMITATIONS: 25 gauge and 20 gauge steel studs are designed for use in non-load bearing wall

construction only. Check local building codes before beginning construction.

clarkdietrich.com

Attach ceiling runner to bottom of

joist or truss.

Use plumb line to set top and

bottom runners.

Attach ﬂoor runner using concrete

anchors.

Cut studs and runners with tin snips.

Twist studs into place. Make sure

studs are level and knockouts /

punch-outs are aligned.

Screw studs to top and bottom

runners using 7/16" pan screws.

Cut and install runners and cripples

around doors and windows.

Snap in grommets for electric

and plumbing.

Attach drywall. Use corner bead

around corners. Tape, spackle and

ﬁnish drywall.