TDS

ManualsBrandsClarkDietrich ManualsBuilding materials1-1/4 in. x 10 ft. Metal Corner Bead

Product Submittal Sheet

Technical Services: 888-437-3244

Engineering Services: 877-832-3206

Sales: 800-543-7140

clarkdietrich.com

103 Deluxe® Corner Bead (CBU)

Metal Corner Bead

ClarkDietrich 103 Deluxe® corner bead is used to provide a high-quality finish and solid protection

at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched

into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion. 103

Deluxe corner bead is considered the premier drywall finishing corner bead product. This product

combines a unique manufacturing process, with specially enhanced galvanized steel to provide

consistent, high-quality finishing each and every time.

Product Data & Ordering Information

Material: 0.0125" min. thickness, galvanized coating

Dimensions: 1-1/4" leg x 1-1/4" leg

Width Length Wt./Ctn. Pcs./Ctn.

1-1/4" x 1-1/4" 8' 55 lbs 63

1-1/4" x 1-1/4" 9' 55 lbs 56

1-1/4" x 1-1/4" 10' 54 lbs 50

1-1/4" x 1-1/4" 12' 66 lbs 42

ASTM & Code Standards

• ASTM C1047

• SDS & Product Certification Information is available at www.clarkdietrich.com/SupportDocs

Storage

All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a

level platform, and protected from the weather.

09.22.00 (Support for Plaster & Gypsum Board)

• Galvanized coating for corrosion protection

• Superior compound adhesion

• Strong metal reinforcement for drywall

corners

• Exposed nose resists impact and forms a

screed for finishing

Sustainability Credits:

For more details and LEED letters contact Technical Services at 888-437-3244 or visit www.clarkdietrich.com/LEED

LEED v4 MR Credit -- Building Product Disclosure and Optimization: EPD (1 point) - Sourcing of Raw Materials (1 point) - Material Ingredients (1 point) - Construction and

Demolition Waste Management (up to 2 points) - Innovation Credit (up to 2 points).

LEED 2009 Credit MR 2 & MR 4 -- ClarkDietrich's steel products are 100% recyclable and have a national average recycled content of 34.2% (19.8% post-consumer and

14.4% pre-consumer). If seeking a higher number to meet Credit MR 5, please contact us at (info@clarkdietrich.com / 888-437-3244)

Project Information Contractor Information Architect Information

Name: Name: Name:

Address: Contact: Contact:

Phone: Phone:

Fax: Fax: