Operation Manual

6 7

English

Controls/Functions

4.1 Front Panel

4.2 Rear Panel

Standby/Power on Indications Lamp : Flashes red light in “Standby” mode and

shows no light in “Power ON” mode.

Power : Switches the receiver between “Standby” and “Power ON” modes.

Menu : To enter or exit the main menu.

Select : To show the Channel List in non-menu mode and select on item or

confirm in menu mode.

- VOL

ȜȞ : To change the volume level in non-menu mode and modify

a setting in menu mode.

- CH ƌƊ : To switch channels or change the cursor position on the

application screen.

No. Name Connector Function

1 ANT IN IEC 169-2 FEMALE Input from terrestrial antenna

2 ANT OUT IEC 169-2 MALE Loop-through output from digital tuner

and Output to TV

3 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner

4 LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner

5 VCR/AUX SCART SCART CVBS Video Output

CVBS, RGB Video Input

Audio Output

6 TV SCART SCART CVBS Video Output, Audio Output

7 RS-232C DB-9 Low speed serial port

8 HDMI HDMI Digital Video/Audio Output

9 S-VIDEO MINI-DIN S-VHS Output

10 VIDEO RCA cinch Composite video output

11 AUDIO L RCA cinch Left audio output

12 AUDIO R RCA cinch Right audio output

13 Y RCA cinch Component video output(Y)

14 Pb RCA cinch Component video output(Pb)

15 Pr RCA cinch Component video output(Pr)

16 S/PDIF Fiber Optic Digital audio output (Optical)

1 3 5

1011 13 14

1 3 4 5 6 7 8

2 4 6 7 8 9

12 15 16