Operation Manual

11
(F) Main Features
• 400 MHz MIPS Processor
• Linux Operating System
• Media Player
• Downloadable Plug-ins supported
• 2 x Smartcard Readers
• 2 x Common Interface
• MPEG2 / H.264 Hardware Decoding
• DVB-S2 Twin Tuners (Loop trough)
• 12 character Dot Matrix VFD
• 128MB NAND Flash / 512MB DDR Memory
• External SATA supported
• 10/100MB Ethernet network interface
• 3 x USB 2.0
• RS232
• HDMI
• Component YPbPr
• Composite Video (RGB)
• 2 x SCART
• S/PDIF for digital bit stream out (optical)
• EPG supported
• Automatic & Manual Service Scan supported
• Multiple LNB control (DiSEqC) supported
• Skin change supported
• Stable SMPS integrated
(G) Technical Data
ET9000 Technical Specifications
Front Panel Display 12-digit Dot Matrix VFD display with status icons
displaying channel names and program information
Smart card slot 2x internal cardreader
Common Interface 2x Slot CI standard
USB 2.0 1x USB port 2.0 max. 500mA
Keys Power, Channel up/down, Volume up/down, Cancel, OK
Rear Panel Power Switch 1x ON/OFF
Sat-IF input/output 2x F-type socket (with Loop Through)
Scart socket Connector TV/VCR
Component socket RCA Cinch 1xY 1xPb 1xPr
Video output(analogue) RCA Cinch 1x Video
Video/Audio output (digital) HDMI Video/audio output (digital)
Audio output (analogue) RCA Cinch stereo 1x left 1x right
Audio output (digital) S/P DIF fibre optical
USB 2.0 3x USB port 2.0 max. 500mA
eSATA 1x
Ethernet network 1x RJ45
Serial port RS2323
Power Mains voltage 95-250V/50-60 Hz
Power consumption (Max. 65W / typ. operation 35W / stand-by 1 W