Operation Manual

13
1. Connecting Satellite Cables
ET9000 has 2 satellite tuners, and one of the first steps is to connect the satellite cable(s) to the tuner(s) in order to gain
optimal signal quality. You can either choose one of the following connection methods depending on the equipment!
A. Two Separate Satellite Cables
In case you have two separate satellite cables providing different broadcast signals, you can configure LNB 1 Input and
LNB 2 Input independently.
B. Internal Loop through
In case of only 1 satellite cable, connect the cable to LNB 1 Input.
2. Connecting the TV (and VCR)
ET 90000 provides a variety of audio/video connection methods.
A. Connnecting TV via HDMI cable
For the sake of the best picture quality, especially for digital TV, HDMI connection is recommended. Most HDTVs have HDMI connectors
to ensure the highest picture quality. In the rear panel of ET 9000 the HDMI connector is available for this purpose. Connect your TV to ET
90000 using a HDMI cable as follows.