Operation Manual

17
You are strongly recommmended to use wizard as it is designed to guide you through the configuration process.
A. Configuring Tuner A
Using LEFT/RIGHT button, you can choose one of the following Configuration Modes:
• Nothing connected
• Simple
• Loop through to: mode to make the LNB1 be internally connected to the LNB2 in.
• Equal to: mode to use the same configuration as that of Tuner B.
• Advanced: for an advanced user configuration.
If you choose Simple configuration mode, the following picture will appear.
The five modes are available for the satellite cable connection between LNB and the ET 90000 as below :