Operation Manual

20
III. Basic Operations
1. Switching Channel
[ i: Press (▲/▼CHANNNEL +/- key / Press ◀ / ▶ to move to the next channels]
The ET 9000 offers various channel zapping methods. You can switch the current channel by pressing
• UP/DOWN key
If you press UP or DOWN key, the Channel Selection menu appears.
You can move up and down to select the channel that you want to tune into
• LEFT/RIGHT key
If you press LEFT or RIGGHT key, the previous or subsequent channel of the current channel is tuned in.
• CHANNEL +/- key
If you press CHANNEL + or - key, this will call up the Channel Selection menu.
• Channel Number
Enter a channel number, and it will instantly tune into the channel.
NOTE : If channel change is not done, it is probably because the selected channel is encryptedd and you do not have a proper smartcard.
2. Volume Control
[ i: Press VOLUME +/- key]
You can adjust the audio volume by pressing VOLUME +/- key. You can also mute or unmute the audio
temporarily by pressing MUTE key
Seite 23