Operation Manual

8
(D) Conditional Access
Amongst the channels that are scanned via the receiver, some channels can be properly tuned in only with the
coresponding Smartcard and/or CAM (Conditional Access Module). The ET9000 provides two Smartcard Reader
slots and two Common Interfaces slots and users need to purchase those Smartcards and CAMs that are
required for viewing such subscription based services.
Insertion of Smartcard
1. Open the front flap on the front right side.
2. Insert Smartcard
3. Make sure that the Smartcard remain inserted while viewing.
Common Interface Module
1. Insert a Smartcard into the CAM (CI module)) as in the below picture.
2. Once the Smartcard inserted into the CAM, insert the CAM into the CI slot.
3. Make sure that the CAM remain inserted while viewing.